Panasonic AJ-HPX3700G Warning and Error Display for Thumbnail Operation and USB HOST MODE

Warning and Error Display for Thumbnail Operation and USB HOST MODE

Item	Message	Description		Measure
	CANNOT ACCESS!	Data cannot be accessed because it is corrupted	Restore media and clips to normal state before
		or for other reasons.	access.
	WRITE	The P2 or SD card is write protected.	Insert write-enabled media.
	PROTECTED!
	CARD FULL!	The P2 or SD card is full.	Insert media with sufficient capacity.
	NO CARD!	No P2 or SD card is inserted.	Insert compatible media.
	NO FILE!	The designated file is not found.	Check the file.
	CANNOT COPY!	Images cannot be copied.	Check the conditions for copying.
	CANNOT DELETE !	Contents version mismatch prevents deletion.	Match devices and contents version.
	UNKNOWN	Warning displayed to indicate contents version	Match devices and contents version.
	CONTENTS	mismatch.
	FORMAT!
	CANNOT FORMAT!	P2 card problem prevents formatting.	Check P2 card.
	CANNOT REPAIR!	Data cannot be repaired since content that	Check selected content.
		cannot be repaired is selected.
	CANNOT RE-	A clip that does not span multiple P2 cards	Check selected content.
	CONNECT!	cannot be reconnected.
	INVALID VALUE!	Entered data was invalid.	Enter data in a valid range.
	UNKNOWN DATA!	The metadata character code is invalid.	Use UTF-8 for the metadata character code. Use
			the viewer to enter correct characters.
Thumbnails	CANNOT REPAIR IN	Some of the selected clip could not be repaired.
	SELECTION!
	NO SD CARD!	No SD card is inserted.	Insert an SD card.
	NO COPY TO SAME	A clip cannot be copied to the card storing the	Copy the selected clip to a card that does not
	CARD!	original clip.	contain the original clip.
	SAME CLIP IS	The clip cannot be copied because a clip that has	Confirm the selected clip and release either the
	SELECTED!	already been copied and the original clip have	source clip or the destination clip and then
		been selected.	execute the copy operation.
	USER CLIP NAME	Characters in the clip name had to be deleted in	The user clip name plus the counter value can
	MODIFIED!	adding the counter value.	only contain up to 100 bytes. Characters in the
			clip name are automatically deleted when the
			total exceeds 100 bytes.
	TOO MANY CLIPS!	Too many clips are selected.	Reduce the number of selected clips.
	LACK OF REC	There is not enough recording capacity left on the	Insert a card with sufficient recording capacity.
	CAPACITY!	card.
	CANNOT CHANGE!	Any thumbnails that cannot be produced on the	Set SYSTEM MODE according to the clips.
		AVC-Intra100 or AVC-Intra50 and displayed in
		gray cannot be changed at the text memo
		position.
	MISSING CLIP!	A shot mark will be added to the clips recorded	Insert all P2 cards with recorded clips, and
		on multiple P2 cards when all P2 cards are not	confirm that the	incomplete clip indicators
		inserted yet.	disappear, and then add shot marks.
	CANNOT CHANGE!	[PERSON] will be entered while the text memo is	Enter [TEXT] before entering [PERSON].
Soft		not available.
keyboard	CANNOT SET!	The entered value is incorrect.	Change the value.
	INVALID VALUE!

164 Maintenance and Inspections: Warning System