Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic AJ-HPX3700G General, Attention, Supported formats

1 212

Download 212 pages, 23.93 Mb

General

Attention

Adjust the following 2 settings when using the unit for the first time.

Adjust the black-balance setting when using the unit for the first time. (Refer to page 55)

The unit is delivered from the factory with the color TV standard not yet specified. To revise the settings for frame frequency according to the TV standard, refer to the procedures described on page 14.

This unit is a CCD camcorder with a camera unit equipped with 2.2 Megapixel 2/3 inch 3 CCD, and record/playback unit that is compatible with the AVC-Intra100, AVC-Intra50, and DVCPRO HD compression formats, all in one body.

The unit supports the HD methods shown in the following table. The unit is equipped with Dual Link (RGB 4:4:4) output, P- 10LOG (Refer to page 112) output suitable for film production, 2D-CMS that will enhance the color rendering properties, and variable frame rate function (VFR hereafter) that can range from 1 to 30 frames for 1080/59.94i / 1080/23.98PsF / 1080/ 24PsF, and 1 to 25 frames for 1080/50i, etc., as a camcorder for production purposes.

For recording, the compression and recording methods are selectable among AVC-Intra100, AVC-Intra50, and DVCPRO HD. Since minimal image deterioration occurs when recording with AVC-Intra100 compression in particular, high image quality can be retained.

Supported formats

	SYSTEM MODE	Shooting/Recording method		VFR		Variable range of VFR

		AVC-Intra100	59.94i
		AVC-Intra100	29.97PN	Possible	1	- 30FRAME
		AVC-Intra50	29.97PN	Possible	1	- 30FRAME
		AVC-Intra50	23.98PN
			23.98PN
	1080-59.94i
	1080-59.94i		59.94i	Possible	1	- 30FRAME

		DVCPRO HD	29.97P	Not possible	–
			23.98P	Not possible	–
			23.98PA

	1080-23.98PsF	AVC-Intra100	23.98PN	Possible	1	- 24/25 - 30FRAME*
	1080-23.98PsF	AVC-Intra50	23.98PN	Possible	1	- 24/25 - 30FRAME*
					(Possible to switch from
		AVC-Intra100			(Possible to switch from
	1080-24PsF	AVC-Intra100	24PN	Possible	menu)
		AVC-Intra50
		AVC-Intra100	50i	Possible	1	- 25FRAME
		AVC-Intra50	25PN	Possible	1	- 25FRAME
	1080-50i	AVC-Intra50	25PN

		DVCPRO HD	50i	Possible	1	- 25FRAME
			50i	Possible	1	- 25FRAME

			25P	Not possible	–
			25P	Not possible	–

* There is a missing image in HD SDI signal for 25 to 30 frames.

For more details, refer to [Selecting a recording signal and method] (page 49) and [Recording formats and output connector signal formats] (page 50).

8 General:

Contents

Operating Instructions Memory Card Camera-Recorder Read this first PLEASE NOTE: What to remember when throwing memory cards away or transferring them to others EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1.Applicable standards and operating environment 2.Pre-requisiteconditions to achieving compliance with the above standards 3.Performance level Contents Preparation Manipulating Clips with Thumbnails Connection with external device Maintenance and Inspections Menu Specifications General Features of Camera unit Features of Recorder/Player unit Text memos & Shot marks Front-mountedSound Level Control Mechanism Support for Built-inUnislot Wireless Receive Recording Time Recording Review Capability Features of the Input/Output unit Other features Dimensions drawing Color TV Standard Settings (Settings for frame frequency) System Configuration Parts and their Functions Power Supply and Accessory Mounting Section Audio (input) Function Section Audio (output) Function Section Shooting and Recording/Playback Functions Section 5.GAIN selector switch 6.OUTPUT/AUTO KNEE selector switch 7.WHITE BAL (white balance memory selector) switch 8.MODE CHECK button 9.MARKER SELECT button 13.TEXT MEMO button 16.MON OUT CHARACTER switch 14.SAVE ON/OFF switch 15.HD SDI A · B (output signal selector) switch 17.HD SDI A connector 19.MON OUT SEL (output signal selection) switch 20.REW (rewind) button and lamp 21.STOP button 22.FF (fast forward) button and lamp 23.PLAY/PAUSE button 32.SD memory card insertion slot 33.Busy (operation mode display) lamp Menu Operation Section Time Code Section Warning and Status Display Functions Display Window Functions LCD Monitor Viewfinder 15.Viewfinder left-rightposition anchoring ring 16.Viewfinder front-backposition anchoring lever Recording and Playback P2 Cards Page How to handle data recorded on P2 cards Basic Procedures Page Normal Recording Normal Recording and Native Recording PRE RECORDING function Variable Frame Rate (VFR) Recording Function Page Flow Effect Shooting Practical Use of Other VFR Recording Functions Page Loop Recording Interval Recording Page Recording Review Function Normal and Variable Speed Playback Text Memo Function Shot Mark Function Recording Setting and Operation Mode Multi Format Video system and Recording format Selecting a recording signal and method Recording formats and output connector signal formats Page Adjusting the White balance and Black Balance Adjusting the White Balance Page Setting Color Temperature Manually Adjusting the Black Balance Setting the Electronic Shutter Shutter Modes Setting the Shutter Mode and Speed Placing the Unit in SYNCHRO SCAN Mode Assigning Functions to User Buttons Page Selecting Audio Input Signals and Adjusting Recording Levels Selecting Audio Input Signals Adjusting Recording Levels Selecting Function for the FRONT AUDIO LEVEL Control CH3 and CH4 Recording Levels Setting Time Data Description of time data Recording time code and user bits Setting of the user bits b c e f Setting the Internal Clock’s Date and Time Setting the Time Code Externally Locking the Time Code Page Page Page Providing an ID to the Camera Setting UMID Information CTL Count Setting and Display Viewfinder Screen Status Displays Lamps in the Viewfinder Screen Mode Check Screen Displays (MODE CHECK button function) Y GET Area Display Selecting Viewfinder Display Information Viewfinder Status Indication Layout Page Page Page Page Page Page Page Page Display Modes and Setting Changes/adjustment Result Messages Setting the Marker Displays Marker Check Screen Displays (MARKER SELECT button function) Checking Return Video Signal in the Viewfinder Adjusting and setting the LCD monitor Selection of video output signals Settings of signals output from HD SDI A · B connector Settings of signals output from MON OUT connector Handling data Handling SD memory cards SD memory card operations Page Page Page How to Use the User Data How to Use Scene File Data Page Page Resetting Menu Option Settings to Defaults Lens file How to provide lens files To save the lens file into the built-inmemory To read the lens file from the builtin memory To write in and read out the lens file to/from the SD memory card Page Chromatic Aberration Compensation (CAC) Page Page Page Cinematograph Settings Page Page RGB 4:4:4 Output and P-10LOGSettings Preparation Power Supply Mounting the Battery and Setting the Battery Type CAUTION: Use of the external DC power supply Mounting the lens and Performing the Flange Back and White Shading Adjustments Page Page Preparing for Audio Input When Using the Front Microphone When Using a Wireless Receiver When Using Audio Devices Mounting the Camera on a Tripod Attaching the Shoulder Strap Attaching the Rain Cover Connection of the remote control unit (AJ-RC10G) Attaching the Front Audio Level Control Knob Connection of the DC OUT connector and External REC start/stop switch Thumbnail Manipulations Overview Thumbnail Screen 4.Recording mode 5.System mode 6.Duration 7.USB HOST mode indicator 8.Clip Number Selecting Thumbnails Playing back Clips Switching the Thumbnail Display Changing thumbnails Shot Mark Text Memo Adding a text memo Playing back a clip at the position where a text memo is recorded Deleting a text memo Using a text memo to break a clip and copy the necessary portion Deleting Clips Restoring Clips Copying Clips Setting of Clip Meta Data Page Page Setting of Proxy (optional) Formatting a P2 Card Formatting SD memory cards Setting the Thumbnail Display Mode Properties Clip Property Modification of recorded clip metadata P2 Card Status Display Write-protectMark P2 Card Status (remaining free space) P2 Card Status (used memory capacity) 3.P2 Card Remaining Capacity/Total Capacity 3.P2 Card used memory capacity/Total Capacity SD memory card Status Display Video Encoder Card Status Display (optional) Connection with external device Connection with external devices using the USB 2.0 port Connection with a PC in the USB DEVICE mode USB HOST mode Switching to the USB HOST mode Using the USB HOST mode 1.PARTITION 2.VENDOR 3.MODEL 4.SIZE 5.USED 8.MODEL 9.DATE/TIME 10.SERIAL 11.VERIFY 12.NAME Page Page Maintenance and Inspections Inspections Before Shooting Preparing for Inspections Inspecting the Camera Unit Inspecting the Memory Recording Functions Maintenance Cleaning Inside the Viewfinder Phenomenon Inherent to CCD Cameras Replacing the Backup Battery Connector Signals PUSH Caution Page Page Warning System Warning Description Tables Page Page Error Codes Card Warning Code Warning and Error Display for Thumbnail Operation and USB HOST MODE Page Menu Menu Configuration Page Setting Menu Options Selecting Options for USER MENU Menu Description Tables SYSTEM SETTING Page Page Page Page Page Page PAINT Page Page Page Page Page Page Page Page Page Page Page Page CAM OPERATION Page Page Page Page MAIN OPERATION Page Page Page Page Page FILE Page Page MAINTENANCE Page OPTION MENU Updating the firmware incorporated into the unit Specifications Digital Video System Audio Characteristics Page Software information for this product For business users in the European Union Information on Disposal in other Countries outside the European Union Note for the battery symbol (bottom two symbol examples):