Setting Menu Options

The menu options are set with the MENU and jog dial buttons.

The menu comprises main menu, sub-menus and options menus.

The data specified through menu options are written and saved in the internal memory of the unit.

This section describes how to set options in MAIN MENU. The other menus can be configured in the same manner (the method of displaying the menu screen depends on the particular menu).

Note

When the unit is in thumbnail mode, the viewfinder displays “THUMBNAIL OPEN”, disabling navigation through the menu.

1 Press the MENU button for 3 seconds or longer. The MAIN MENU screen appears, together with its options.



















2 Turn the jog dial button to move the mark () to a desired menu option. Then, press the jog dial button to display the sub-menu screen.



















3 Turn the jog dial button to move the mark () to a desired menu option. Then, press the jog dial button to display the options screen.

















4 Turn the jog dial button to move the mark () to a desired option. Then, press the jog dial button. The value starts blinking.



       

5 Turn the jog dial button to change the value.

To increase the value:

Turn the jog dial button clockwise, as seen from the front of the camera.

To decrease the value:

Turn the jog dial button anti-clockwise, as seen from the front of the camera.

Each turn of the dial switches the value by one step. A quick turn changes the value rapidly; a slow turn makes a fine adjustment.

To turn an option on or off:

To select “ON”, turn the jog dial button clockwise, as seen from the front of the camera.

To select “OFF”, turn the jog dial button anti-clockwise, as seen from the front of the camera.

To return the changed set value to the previous one: To return the changed value to the previous one, press the SHOT MARKER/MENU CANCEL button once while the changed value is flashing and “PUSH CANCEL BACK TO PREV” will appear. Press the SHOT MARKER/MENU CANCEL button again to return the set value to the value before the change.

Notes

The following menu items cannot be canceled using the SHOT MARKER/MENU CANCEL button.

–Pages on the USER MENU SELECT screen

–Pages on the FILE screen

–CAMERA ID

–Part of the WHITE BALANCE MODE pages

–BATTERY SETTING1, 2

–UMID SET/INFO

In the 1080/23.98P and 1080/24P modes, the menu displayed on the LCD monitor may blink. This is normal, and does not indicate that a fault has occurred.

168 Menu: Menu Configuration