Panasonic AJ-HPX3700G manual 200

	Items/				Adjustable		Remarks
Data Saved					Range
VITC UB MODE					USER/EXT	Select the user bits mode for VAUX TC
					TIME	(VITC).
					DATE	USER/EXT:
					TCG
							If UB MODE is set to “EXT”, the
					FRM RATE
							EXT value is recorded. If not,
					REGEN
							USER value set by UB is
						TIME:	recorded.
							Select local time (hours,
							minutes, seconds).
						DATE: Select local date and time (2 last
						TCG:	digits of year, month, date, time).
							TCG value enters UB.
						FRM RATE:
							Select camera shooting
							information (frame rate, etc.).
							For more information, see
							[Frame rate information
							recorded in user bits] (page 66).
						REGEN: Read out value stored in card
						Note	and record value continuously.
						When the unit operates in 24P, 24PA,
						and Native mode, the “FRM RATE” is
						fixed.
–	C	U	F	–
TCG SET HOLD					ON	On/off switching for the feature that
					OFF	always starts recording (when the power
						is turned on again) the TCG value that
						was set before the power is turned off.
–	C	U	F	–
FIRST REC TC					PRESET	For selecting whether the time code is
					REGEN	regenerated to the value on the P2 card
						when first recording after switching on
						the power, inserting the P2 card or
						changing the P2 card that is the
						recording target.
						PRESET:
							Use the unit’s internal time code.
						REGEN: For clips recorded on the
							recording-target P2 card,
							regenerate the time code as the
							time code of the clip that has the
							most recent date and time.
						Notes
						Set the date and time accurately. For
						guidance on setting, see [Setting the
						Internal Clock’s Date and Time]
						(page 67).
						During operation in either 24P or 24PA
						mode, regeneration of the value of the
						card recorded in drop-frame is not
						permitted.
–	C	U	F	–
P.OFF LCD					ON	For selecting whether to allow the time
DISPLAY					OFF	code of the LCD monitor to be set and
						the counter to be displayed when the
						power is off.
						ON:	It is possible to set the time code
							and display the counter when
						OFF:	the power is off.
							Power-down LCD monitor while
							camera power is turned off.
							Setting and indication disabled.
–	C	U	F	–
TC	OUT				TCG	Select the time code to be output to the
					TCG/TCR	time code output connector.
						TCG:	Always output time code
							generator value.
						TCG/TCR:
							Output time code generator
							value in recording mode, and
							time code reader value in
							playback mode.
–	C	U	F	–

	Items/				Adjustable		Remarks
Data Saved					Range
TC DISP SEL					30F	Select the display format for the time
					24F	code frame digits. (For 1080-59.94i only)
						For details, refer to [Recording time code
						and user bits] (page 64).
						30F:	Display time code frame digits in
						24F:	30 frames.
							Convert time code frame digits
							into 24 frames for display.
–	C	U	F	–
TC	VIDEO				0	For setting to correct the time code
SYNCHRO					1	according to the delay of video signals.
					2	0:	Do not correct.
					3
						1:	To delay the time code to be
							input according to the timing of
						2:	the video images.
							To forward the time code to be
							output according to the timing of
						3:	the video images.
							To delay the time code to be
							input and forward the time code
							to be output, respectively,
							according to the timing of the
							video images.
						For details, refer to [Externally Locking
						the Time Code] (page 69).
–	C	U	F	–
REC REVIEW					ON	For selecting whether the time code is
REGEN					OFF	regenerated to the value on the P2 card
						or not, when subsequent recording starts
						after setting the RET SW item on the
						<SW MODE> screen to “R.REVIEW”
						and pressing the RET button on the lens
						or the user button on the unit on which
						the RET SW function is assigned.
						ON:	The time code is regenerated.
						OFF:	The time code is not
							regenerated.
–	C	U	F	–

UMID SET/INFO

	Items/				Adjustable	Remarks
Data Saved					Range
COUNTRY					NO-INFO	Input the user’s country. “NO-INFO” is
						displayed until the input completes.
–	C	U	F	–
ORGANIZATION					NO-INFO	Input the user’s organization or company
						name. “NO-INFO” is displayed until the
						input completes.
–	C	U	F	–
USER					NO-INFO	Input the user name. “NO-INFO” is
						displayed until the input completes.
–	C	U	F	–
DEVICE NODE						Indicate the product ID number.
–	–	–	–	–

Note

Please refer to [Setting UMID Information] (page 74) for the UMID information setting.

200 Menu: Menu Description Tables