Color TV Standard Settings (Settings for frame frequency)
The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the preferred standard, refer to the procedures described below.
1 After connecting the unit to the power supply and then turning on the power, press the MENU button while pressing the LIGHT button to open OPTION MENU.
2 Turn the jog dial button to move the cursor (arrow) to the AREA SELECT item on the <AREA SETTING> screen in OPTION MENU page, and then press the jog dial button.
3 Select the area among NTSC, NTSC (J), and PAL. After selecting the area by turning the jog dial button, press the jog dial button.
4 Move the cursor (arrow) to AREA SET by turning the jog dial button, and then press the jog dial button. The following window appears.
Notes
The settings are not saved unless AREA SET is executed even if NTSC, NTSC (J), or PAL is selected in the AREA SELECT.
When AREA SELECT is revised, the “ AREA SET” blinks.
When these items are set when the unit is used for the first time, only the following 8 items are revised. When the other settings of the unit are set in MAIN MENU, the menu setting values for items other than the following 8 are ones that were set at the factory.
| Factory | NTSC | NTSC(J) | PAL | |
| settings | ||||
|
|
|
| ||
|
|
|
|
| |
SYSTEM | 1080- | 1080- | 1080- | ||
MODE | 59.94i | 59.94i | 59.94i | ||
| |||||
REC | |||||
FORMAT | /24PN | /24PN | /24PN | /25PN | |
FRAME | 24FRAME | 24FRAME | 24FRAME | 25FRAME | |
RATE | |||||
|
|
|
| ||
USR SW | 24FRAME | 24FRAME | 24FRAME | 25FRAME | |
F.RATE | |||||
|
|
|
| ||
REAR LINE | +4dB | +4dB | +4dB | 0dB | |
IN LVL | |||||
|
|
|
| ||
AUDIO OUT | +4dB | +4dB | +4dB | 0dB | |
LVL | |||||
|
|
|
| ||
HEADROOM | 20dB | 20dB | 20dB | 18dB | |
|
|
|
|
| |
GUI metadata | American | American | Japanese/ | American | |
language | English | English | For Japan | English | |
indication | |||||
|
|
|
| ||
LANGUAGE | Not | Not | ENGLISH | Not | |
displayed | displayed | JAPANESE | displayed | ||
| |||||
|
|
|
|
| |
DATE | |||||
FORMAT*1 | |||||
|
|
|
|
*1 Select THUMBNAIL SETUP DATE FORMAT from the thumbnail menu. For details refer to [Setting the Thumbnail Display Mode] (page 142).
5 Move the arrow () to YES and press the jog dial button. The settings selected in step 3 above are reflected in FACTORY and CURRENT data.
6 Turn off the power supply once and then turn on it again.
14 | General: Color TV Standard Settings (Settings for frame frequency) |