Panasonic AJ-HPX3700G 110

Return Cinematograph Setting to Factory Setting

1	Display the MAIN MENU by pressing the MENU button	3 The following screen is displayed, so move the arrow
	for over 3 seconds, then open the <INITIALIZE> screen	(cursor) to “YES” by turning the JOG dial button, and
	from the FILE page.
		press the JOG dial button.
2
	Select READ FACTORY DATA with the JOG dial button,	Data stored in the Factory setting area of the built-in
		memory will be read in, and the setting is completed.

and press the JOG dial button.









  

4 Press the MENU button to complete the menu operation.

Difference Between Cinematograph Settings and Normal Settings

The following are the differences between the cinematograph setting and the normal factory settings.

Menu settings

Page	Menu screen		Item	Factory setting	Cinematograph
					setting
SYSTEM SETTING	SYSTEM MODE		SYSTEM MODE	1080-59.94i	1080-23.98PsF
			VFR	OFF	ON
	OUTPUT SEL		SIGNAL FORMAT	4:2:2	4:4:4
			P-10LOG	OFF	ON
			OUTPUT ITEM	MENU ONLY	STATUS
			DOWNCON MODE	SQUEEZE	LT-BOX
	HD SDI A · B OUT MARKER		CENTER MARK	1	2
			FRAME MARK	OFF	ON
			FRAME SIG	4:3	VISTA
	MONI OUT MARKER		CENTER MARK	1	2
			FRAME MARK	OFF	ON
			FRAME SIG	4:3	VISTA
PAINT	LOW SETTING		MATRIX TABLE	A	OFF
	MID SETTING		MATRIX TABLE	A	OFF
	HIGH SETTING		MATRIX TABLE	A	OFF
	CAMERA SETTING		DETAIL	ON	OFF
VF	VF DISPLAY		STATUS MODE	NORMAL	FILM-REC
			LOW LIGHT LVL	35%	OFF
	VF MARKER		SAFETY MARK (A)	1	2
			FRAME MARK (A)	OFF	ON
			FRAME SIG (A)	4:3	VISTA
			SAFETY MARK (B)	1	2
			FRAME MARK (B)	OFF	ON
			FRAME SIG (B)	4:3	VISTA
	VF INDICATOR1		EXTENDER	ON	OFF
			GAIN	ON	OFF
			ZOOM LVL	ON	OFF
			SYSTEM MODE	OFF	ON
	VF INDICATOR3		BATTERY	ON	OFF
			AUDIO LVL	ON	OFF
CAM OPERATION	SHUTTER SPEED		SYNCHRO SCAN2	ON	OFF
	SHUTTER SELECT		POSITION4 SEL	120.0deg	90.0deg
			POSITION5 SEL	90.0deg	45.0deg
			POSITION6 SEL	45.0deg	1/60
	USER SW		USER2 SW	VF GAM	REC SW
			MARKER SEL (USER3 SW)	VF MARK	VF GAM

110 Adjustments and Settings for Recording: Cinematograph Settings

Contents

Operating Instructions Memory Card Camera-Recorder Read this first PLEASE NOTE: What to remember when throwing memory cards away or transferring them to others EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1.Applicable standards and operating environment 2.Pre-requisiteconditions to achieving compliance with the above standards 3.Performance level Contents Preparation Manipulating Clips with Thumbnails Connection with external device Maintenance and Inspections Menu Specifications General Features of Camera unit Features of Recorder/Player unit Text memos & Shot marks Front-mountedSound Level Control Mechanism Support for Built-inUnislot Wireless Receive Recording Time Recording Review Capability Features of the Input/Output unit Other features Dimensions drawing Color TV Standard Settings (Settings for frame frequency) System Configuration Parts and their Functions Power Supply and Accessory Mounting Section Audio (input) Function Section Audio (output) Function Section Shooting and Recording/Playback Functions Section 5.GAIN selector switch 6.OUTPUT/AUTO KNEE selector switch 7.WHITE BAL (white balance memory selector) switch 8.MODE CHECK button 9.MARKER SELECT button 13.TEXT MEMO button 16.MON OUT CHARACTER switch 14.SAVE ON/OFF switch 15.HD SDI A · B (output signal selector) switch 17.HD SDI A connector 19.MON OUT SEL (output signal selection) switch 20.REW (rewind) button and lamp 21.STOP button 22.FF (fast forward) button and lamp 23.PLAY/PAUSE button 32.SD memory card insertion slot 33.Busy (operation mode display) lamp Menu Operation Section Time Code Section Warning and Status Display Functions Display Window Functions LCD Monitor Viewfinder 15.Viewfinder left-rightposition anchoring ring 16.Viewfinder front-backposition anchoring lever Recording and Playback P2 Cards Page How to handle data recorded on P2 cards Basic Procedures Page Normal Recording Normal Recording and Native Recording PRE RECORDING function Variable Frame Rate (VFR) Recording Function Page Flow Effect Shooting Practical Use of Other VFR Recording Functions Page Loop Recording Interval Recording Page Recording Review Function Normal and Variable Speed Playback Text Memo Function Shot Mark Function Recording Setting and Operation Mode Multi Format Video system and Recording format Selecting a recording signal and method Recording formats and output connector signal formats Page Adjusting the White balance and Black Balance Adjusting the White Balance Page Setting Color Temperature Manually Adjusting the Black Balance Setting the Electronic Shutter Shutter Modes Setting the Shutter Mode and Speed Placing the Unit in SYNCHRO SCAN Mode Assigning Functions to User Buttons Page Selecting Audio Input Signals and Adjusting Recording Levels Selecting Audio Input Signals Adjusting Recording Levels Selecting Function for the FRONT AUDIO LEVEL Control CH3 and CH4 Recording Levels Setting Time Data Description of time data Recording time code and user bits Setting of the user bits b c e f Setting the Internal Clock’s Date and Time Setting the Time Code Externally Locking the Time Code Page Page Page Providing an ID to the Camera Setting UMID Information CTL Count Setting and Display Viewfinder Screen Status Displays Lamps in the Viewfinder Screen Mode Check Screen Displays (MODE CHECK button function) Y GET Area Display Selecting Viewfinder Display Information Viewfinder Status Indication Layout Page Page Page Page Page Page Page Page Display Modes and Setting Changes/adjustment Result Messages Setting the Marker Displays Marker Check Screen Displays (MARKER SELECT button function) Checking Return Video Signal in the Viewfinder Adjusting and setting the LCD monitor Selection of video output signals Settings of signals output from HD SDI A · B connector Settings of signals output from MON OUT connector Handling data Handling SD memory cards SD memory card operations Page Page Page How to Use the User Data How to Use Scene File Data Page Page Resetting Menu Option Settings to Defaults Lens file How to provide lens files To save the lens file into the built-inmemory To read the lens file from the builtin memory To write in and read out the lens file to/from the SD memory card Page Chromatic Aberration Compensation (CAC) Page Page Page Cinematograph Settings Page Page RGB 4:4:4 Output and P-10LOGSettings Preparation Power Supply Mounting the Battery and Setting the Battery Type CAUTION: Use of the external DC power supply Mounting the lens and Performing the Flange Back and White Shading Adjustments Page Page Preparing for Audio Input When Using the Front Microphone When Using a Wireless Receiver When Using Audio Devices Mounting the Camera on a Tripod Attaching the Shoulder Strap Attaching the Rain Cover Connection of the remote control unit (AJ-RC10G) Attaching the Front Audio Level Control Knob Connection of the DC OUT connector and External REC start/stop switch Thumbnail Manipulations Overview Thumbnail Screen 4.Recording mode 5.System mode 6.Duration 7.USB HOST mode indicator 8.Clip Number Selecting Thumbnails Playing back Clips Switching the Thumbnail Display Changing thumbnails Shot Mark Text Memo Adding a text memo Playing back a clip at the position where a text memo is recorded Deleting a text memo Using a text memo to break a clip and copy the necessary portion Deleting Clips Restoring Clips Copying Clips Setting of Clip Meta Data Page Page Setting of Proxy (optional) Formatting a P2 Card Formatting SD memory cards Setting the Thumbnail Display Mode Properties Clip Property Modification of recorded clip metadata P2 Card Status Display Write-protectMark P2 Card Status (remaining free space) P2 Card Status (used memory capacity) 3.P2 Card Remaining Capacity/Total Capacity 3.P2 Card used memory capacity/Total Capacity SD memory card Status Display Video Encoder Card Status Display (optional) Connection with external device Connection with external devices using the USB 2.0 port Connection with a PC in the USB DEVICE mode USB HOST mode Switching to the USB HOST mode Using the USB HOST mode 1.PARTITION 2.VENDOR 3.MODEL 4.SIZE 5.USED 8.MODEL 9.DATE/TIME 10.SERIAL 11.VERIFY 12.NAME Page Page Maintenance and Inspections Inspections Before Shooting Preparing for Inspections Inspecting the Camera Unit Inspecting the Memory Recording Functions Maintenance Cleaning Inside the Viewfinder Phenomenon Inherent to CCD Cameras Replacing the Backup Battery Connector Signals PUSH Caution Page Page Warning System Warning Description Tables Page Page Error Codes Card Warning Code Warning and Error Display for Thumbnail Operation and USB HOST MODE Page Menu Menu Configuration Page Setting Menu Options Selecting Options for USER MENU Menu Description Tables SYSTEM SETTING Page Page Page Page Page Page PAINT Page Page Page Page Page Page Page Page Page Page Page Page CAM OPERATION Page Page Page Page MAIN OPERATION Page Page Page Page Page FILE Page Page MAINTENANCE Page OPTION MENU Updating the firmware incorporated into the unit Specifications Digital Video System Audio Characteristics Page Software information for this product For business users in the European Union Information on Disposal in other Countries outside the European Union Note for the battery symbol (bottom two symbol examples):