Control reference guide

Front

ENGLISH

POWER buttonP2C LED

Use this button to turn the unit ON and OFF. When the unit is OFF, simply press the [POWER] button to turn it ON. When ON, hold the [POWER] button for at least two seconds to turn it OFF.

POWER LED

Lights when the unit is ON.

The POWER LED flashes during startup or shutdown.

P2C button

Press to format P2 cards. After copying data to the HDD, you can format the P2 card as needed. (See page E-17)

Note:

Data cannot be recovered after formatting. Before formatting cards, make sure all the data may safely be deleted.

HDD button

Press to format the internal HDD. All unneeded data on the HDD can be deleted at once.

(See page E-18)

Note:

Data cannot be recovered after formatting. Before formatting the HDD, make sure all the data may safely be deleted.

Lights or flashes when the unit is accessing a P2 card.

(See pages E-16 and E-17)

HDD LED

Lights or flashes when the unit is accessing the internal HDD.

(See pages E-16 and E-18)

ERROR LED

Lights or flashes if errors occur.

Errors are identified by the combination of [COPY STATUS] LEDs on the front and [E1 to E4], [P2C], and [HDD] LEDs on the top.

(See pages E-15 and E-26 to E-28)

P2 card slot

A dedicated slot for P2 cards. Before inserting a

P2 card, make sure the EJECT button is in. Hold the card level as you insert it.

Never insert anything in the slot except P2 cards.

EJECT button

Press to eject P2 cards from the slot. (See page E-13)

COPY STATUS LEDs

Indicates the progress of copying or formatting. (See pages E-16 to E-18 and E-28)

E-10