Control reference guide (continued)
Top

 

 

Right side

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

START button

Press to start copying or formatting.

Hold the [START] button for at least 2 seconds to start either process.

CANCEL button

Press to cancel copying.

During copying, hold the [CANCEL] button for at least 2 seconds to cancel copying.

The [USB] indicator remains lit (green) as long as a USB 2.0 cable is connected.

Battery/HDD indicator and error LEDs [REMAIN]

Indicates the remaining battery level, available HDD capacity, and, if errors occur, error

identification.

(See pages E-14, E-15, E-26 to E-28)

Sliding knob

To open the front panel cover, slide the knob in the direction of the arrow.

Battery level indicator button [ ]

After this button is pressed, the remaining power level of the battery pack will be displayed for about 2 seconds in , the [REMAIN] indicator.

(See page E-15)

The [USB] indicator remains lit (green) as long as a USB 2.0 cable is connected.

USB 2.0 connector (Type B)

When connecting the unit to a computer, plug the USB 2.0 cable into this connector.

Note:

Computers used with the unit must support USB 2.0.

HDD capacity indicator button [HDD CAP]

After this button is pressed, the available HDD capacity will be displayed for about 2 seconds in , the [REMAIN] indicator.

The number in [REMAIN] represents how many cards can be copied to the HDD.

(See page E-14)

E-11