P2 Store Manager

Using the P2 Store Manager application, you can display the status of the AJ-PCS060G and manage the unit in several ways.

Features HDD status display

You can check the unit’s HDD partition information, self-diagnostic information, and more.

AJ-PCS060G setup

You can customize operating parameters for the unit, including enabling or disabling auto power OFF.

AJ-PCS060G software updates

You can download software from the Panasonic website to keep the unit up to date.

System requirements

Your computer must meet these requirements for P2 Store Manager.

Operating system: Windows XP Professional SP2 or later

Windows 2000 SP4 or later

RAM:

256 MB or more (512 MB or more recommended)

Processor:

Pentium4 processor

1.0 GHz or higher

 

(Pentium4 processor

1.5 GHz or higher recommended)

Interface:

Equipped with a USB 2.0 port

Installation/uninstallation

P2 Store Manager is installed automatically when you install P2 Driver from the CD-ROM on your computer. For instructions on installation and uninstallation, refer to the included Install Manual.

ENGLISH

Starting and closing P2 Store Manager

1.Use the USB 2.0 cable to connect the unit to the computer2.Turn the unit ON by pressing the [POWER] button

On the unit, the POWER LED lights in green, and the connection is automatically detected.

3.Start P2 Store Manager

Windows XP Professional:

Go to [Start] → [All Programs] → [Panasonic P2] → [P2 Store Manager].

Windows 2000:

Go to [Start] → [Programs] → [Panasonic P2] → [P2 Store Manager].

4.Make sure the indicator in the lower-left corner of the P2 Store Manager screen displays “State: Connecting.”

You can now display the unit’s status and manage it. (See page E-21)

5.To close P2 Store Manager, click the button in the upper-right corner The P2 Store Manager screen is closed.

E-20