
Copying (continued)
Canceling copy operationsYou can cancel copying in progress as follows.1.Hold the [CANCEL] button for at least 2 secondsThe [COPY STATUS], [P2C], and [HDD] LEDs change as follows. : LED lit
COPY STATUS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OR |
|
| OR |
|
| OR |
|
| OR |
|
| OR - | - | |
|
|
|
|
| ||||||||||||
|
|
|
|
|
Note:
Canceling copy automatically deletes copied data.Formatting
Formatting P2 cardsYou can delete all data on P2 cards.Data cannot be recovered after formatting. Before formatting cards, make sure all the data may safely be deleted.
Do not turn the unit OFF or eject P2 cards when the [P2C] LED is flashing.P2 cards cannot be formatted if the
1.With the unit ON, insert a P2 card in the slot
2.Hold the [P2C] button for at least 2 secondsThe [COPY STATUS], [P2C], and [HDD] LEDs change as follows.
|
|
| : LED lit | : | LED flashing |
|
|
|
|
| ||||
OR : orange |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| COPY STATUS |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OR |
| OR |
| OR |
| OR | OR |
|
| OR | - |
|
|
|
| |||||||||||
|
|
|
|
The [COPY STATUS], [P2C], and [HDD] LEDs go out, and P2 card formatting begins. Formatting is complete when the [P2C] LED flashes in orange.
Note:
While the [COPY STATUS], [P2C], and [HDD] LEDs are on in step 2, if you do not press the [START] button within 2 seconds (step 3), the P2 card will not be formatted. To format the card, repeat the process from step 2.