Control reference guide (continued)

Left side

Rear panel

Front panel

side

side

ENGLISH

Back
Sliding switch cover Sliding switch

Slide toward the front to enable software updates.

Normally, keep the switch toward the back. (See page E-25)

Power inlet

Insert an optional battery pack or AC adapter here.

DC IN socket (7.9 V) Battery lock release button

When removing optional battery packs or AC adapters, hold down the button as you slide it toward the button side.

VERIFY switch

Use this switch to verify data after it has been copied from P2 cards onto the internal HDD. (See page E-16)

ON : Verify

OFF: Do not verify

Note:

To ensure accurate copying, slide the VERIFY switch to ON. If it is set to OFF, the unit may not be able to copy correctly in some cases. However, note that copying will take twice as long with verification (when ON) than without (when OFF).

E-12