Panasonic CF-T4 Open the display, Connect your computer to a power outlet, Turn your computer on

Models: CF-T4

1 56
Download 56 pages 37.89 Kb
Page 15
Image 15
4 Open the display.

4 Open the display.

APress and hold the latch (B) located at the front.

BLift open the display.

z Do not open the display wider than necessary (140° or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. Hold the C (below) segment to open or close the computer.

5 Connect your computer to a power outlet.

zBe sure the AC adaptor is connected until completing the first-time use operation.

zThe battery pack will be charged automatically.

Charging Time: Approx. 5 hours (Power off), Approx. 7 hours (Power on) (Varies depending on the usage conditions.)

zWhen using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.

CAUTION

Handling the AC adaptor

zDo not subject the AC adaptor to any strong impact.

Using the AC adaptor after a strong impact such as being dropped may result in electrocution, short circuit, or fire.

zUse only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.

zProblems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterrupt- ible power source (UPS) is highly recommended unless running from the battery pack alone.

Preparations

6 Turn your computer on.

zSlide the power switch 5 Connect your computer to a power outlet. and hold it for approximately one second until the power indicator Handling the AC adaptor turns on before releasing it.

CAUTION

zDo not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly.

zDo not slide the power switch repeatedly.

zDo not press any keys or touch the touch pad or touchscreen until [Windows XP Professional Setup] is displayed.

zDo not change the Setup Utility until completing step 7. If you do so, Windows setup may not operate properly.

15

Page 15
Image 15
Panasonic CF-T4 Open the display, Connect your computer to a power outlet, Turn your computer on, Preparations