(You can cancel this operation by pressing the 0 key.) The confirmation message will be displayed.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled...] appears, press the Y key.
When the message [Computer must be rebooted in order to execute [Erase HDD]] appears, press the R key.
GPress the Y key.
Hard Disk Data Erase Utility will start.
HWhen [<<<Start menu>>>] is displayed, press the Enter key.
IThe approximate time required for erasing data will be displayed. Press the Space key.
JAt the confirmation message, press the Enter key. The operation of erasing the hard disk starts.
z If necessary, the “hard disk data erase” operation can be cancelled after it has begun by pressing the Ctrl+C key.
If the operation is cancelled before being completed, a part of data will not be erased.
KThe message "Hard disk data has been deleted" will be displayed. Remove the Product Recovery
z If a problem occurred during the operation, an error message will be displayed.
Important Information
51
