Using the Touch Pad

Use the touch pad to move the cursor on the screen and perform computer operations.

A. Work Surface (touch pad)

B. Left Button C. Right Button

Function

Operation

Moving the Cursor

Move the tip of your finger lightly over the work

 

 

surface.

Tapping/Clicking

 

tapping

or

clicking

zA right-click: Can only be performed by clicking the right but- ton.

Double-Tapping/

Double-Clicking

double-tapping

or

double-clicking

Dragging

Two quick taps, but on the second tap leave your finger down (applying pressure) and move it on the work surface.

or

While holding down the button, move your finger on the work sur- face.

Vertical Scroll /

Horizontal Scroll

Trace a circle around the touch pad. A setting is required before using the horizontal scrolling function. (Î “Using the Touch Pad” in onscreen Reference Manual)

NOTE

zYou can change the speed of the double-click or the operations of mouse but- tons using [Mouse Properties] screen.

To display [Mouse Properties]:

Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].

zWhen using the touch pad, keep the following in mind.

By design the touch pad is to be used with a finger tip only. Do not place any object or press down forcefully with sharp-pointed objects, i.e. finger nails, pencils, or pens on the work surface.

Try to avoid having any harmful substances, such as oil, come in contact with the touch pad. The cursor may not work properly in such cases.

‹When the cursor doesn’t move the way you want it to

zSensitivity when touching the touch pad can be adjusted. (Î “Using the Touch Pad” in onscreen Reference Manual)

zWhen an external mouse is connected and the cursor does not operate properly: In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you want to use the touch pad again, return the setting to [Enable].

Getting Started

23

Page 23
Image 23
Panasonic CF-T4 operating instructions Using the Touch Pad, ‹When the cursor doesn’t move the way you want it to