Panasonic CF-T4 operating instructions Create a Backup Area

NOTE

zRegarding backup area

•Requires availability of at least half of the entire hard disk. Without sufficient space available, the backup area cannot be created.

•When the backup area is created, the usable hard disk capacity will be reduced to less than half.

•The backup area cannot be accessed from Windows. For this reason, backed up data cannot be copied to CD-R or other removable disk media.

•When the hard disk backup function is executed, data in the backup area will be overwritten. If newly created or edited data is backed up later, data stored previously in the backup area will be lost.

Create a Backup Area

ATurn off the computer and connect the DVD-ROM & CD-R/RW drive to the computer.

BTurn the computer on, and press the F2 key while [Panasonic] boot screen is displayed.

The Setup Utility will start up.

If a password has been set, enter the Supervisor Password. You cannot register [Boot] menu with a User Password.

CSelect the [Boot] menu, then select [USB CDD] and press the F6 key until [USB CDD] is at the top of [Boot priority order].

DPlace the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW drive, then press the F10 key.

At the confirmation message, select [Yes] and press the Enter key. The computer will restart. If [Enter Password] is displayed during the fol- lowing procedures, input the Supervisor Password or the User Password. This screen should appear.

EPress the 3 key to execute [3. [Backup]].

CAUTION

zWhen dividing the hard disk into partitions

Do not execute [1. [Recovery]] to divide the hard disk into partitions. The hard disk backup function cannot be enabled after the hard disk has been partitioned. Use step G to divide the hard disk.

F At the confirmation message, press the Y key.

G Select how to divide the hard disk from the menu.

<To create a backup area and enable the backup function without dividing the hard disk>

Select [1].Information

Important

47