To cancel recording when recording has already begun
1 When this unit is on
Press [g].
The confirmation screen appears.
2 Press [w , q] to select “Stop Recording” and press [OK].
Recording stops and the timer recording is cancelled. (Daily and weekly timers remain and timer recording will start as programmed.)
To release the programme from recording standby
Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
1
2 Press [e , r] to select the programme and press the “Red” button.
The timer icon (Ô 18, right) disappears.
•To put the programme on recording standby again Perform step 2 again before the programme start time to put the programme on recording standby. Timer recording will work only if the timer icon is displayed.
Notes on timer recording
•When an inserted disc has been recorded with the signal system different from the one set in the default TV system (Ô 39), this unit does not enter the timer recording standby and the timer recording will not start.
•Timer recordings are activated regardless of whether the unit is turned on/off.
•“z” flashes on the unit’s display for about 5 seconds when the unit cannot go to timer recording standby (e.g., a recordable disc is not in the disc tray).
•Timer recordings begin when the set time is reached even when recording or when playing.
•If the unit is turned on when timer recording begins, it remains turned on after recording finishes. It does not turn off automatically. You can turn the unit off during timer recording.
•If the unit is not put in the timer recording standby mode at the last 10 minutes before the programmed timer recording starting time, “z” flashes on the unit’s display. In this case, insert a recordable disc to put the unit in the timer recording standby mode.
•If you are making consecutive recordings that will start one after the other, the beginning of the later programme cannot be recorded.
e.g., Programme1
| 11:00 |
Programme1 Programme2 | |
Recorded | Recorded |
Not recorded
•If the actual broadcasting times of timer recordings overlap, the recording that starts first always has priority, and the recording of the later programme will start only after the first timer recording has finished.
Check, change or delete a programme
Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons |
| ||
|
| Timer recording standby is activated. | recording |
| |||
|
| This programme is currently recording. | |
| |||
|
| The times overlap those in another | |
|
|
| |
|
| programme. Recording of the programme |
|
|
| with the later start time starts when the |
|
|
| earlier programme finishes recording. | Timer |
|
| You stopped a weekly or daily timer | |
|
|
| |
|
| recording. The icon disappears the next |
|
|
| time the timer programme starts recording. |
|
The disc was full so the programme failed to record.
The programme was
XThe programme did not complete recording because the disc is dirty or some other reason.
Timer |
|
|
| Remain | 1:57 SP | |
Recording |
|
| SAT 05.07.08 10:20:42 | |||
No. | Name | Date | Start | Stop | Mode | Drive |
space | ||||||
01 | ARD | 5. 7. SAT | 19:00 | 20:00 | SP | OK |
|
| New Timer Programme |
|
| ||
Press OK to store new programme. |
|
|
| |||
OK |
|
|
|
|
|
|
RETURN |
|
|
|
|
| |
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in the remaining space.
→(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.
!: It may not be possible to record because:
•no disc is inserted
•the disc is
•there is no more space left
•the number of possible titles has reached its maximum.
•the inserted disc has been recorded with the signal system different from the signal system of TV system signal set on this unit.
nTo change a programme
Press [e , r] to select the programme and press [OK] (Ô 18, step 3).
nTo delete a programme
Press [e , r] to select the programme and press [DELETE 
]. You can also delete a programme with the following steps
1Press [e , r] to select the programme and press [OPTION].
2Press [e , r] to select “Delete” and press [OK].
nTo exit the timer recording list
Press [PROG/CHECK].
•Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.
RQT9053
19
