Panasonic DMR-ES18 operating instructions Connection, Connecting a television, Other connections Ô

STEP 1 Connection

•Before connection, turn off all equipment and read the appropriate operating instructions.

•Select the connection pattern that matches your environment from patterns A-B. Confirm connections not listed below with your dealer.

For Middle East and South Africa

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.

When the unit is not to be used for a long time

To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off.

[approx. 2 W (Power Save mode)]

When “Power Save” is set to “On”, the “Quick Start” function does not work.

Connecting a television

To the aerial

	Aerial	Television’s rear panel
	cable
		VHF/UHF	AUDIO IN VIDEO
		RF IN	R L IN
			Red White Yellow
	RF coaxial cable
	(included)
1	2		3
			Audio/video cable
			(included)
			Red White Yellow

Connecting to a television with 21-pin Scart terminal

For Saudi Arabia	To household mains socket
	(AC 220 to 240 V, 50/60 Hz)
AC mains lead (included)
Connect only after all other connections
are complete.
For Middle East and South Africa		4
Use the AC mains lead that matches the
socket for the area you live in.

For Asia

AC mains lead with a label is for Thailand. AC mains lead without a label is for areas other than Thailand.

Other connections (Ô 12)

Cooling fan

This unit’s rear panel

You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit.

Required setting

“AV1 Output” in the Setup menu (Ô 39)

RQT9053

10