Panasonic DMR-ES18 operating instructions Connecting a television and VCR, Connection

Connecting a television and VCR

To the aerial	Television’s rear panel
	VHF/UHF	AUDIO IN VIDEO
	RF IN	R L IN

Red White Yellow

	RF coaxial cable
	(included)
4	5
	Audio/video cable

(included)

For Saudi Arabia	To household mains socket
	(AC 220 to 240 V, 50/60 Hz)
AC mains lead (included)
Connect only after all other connections
are complete.		6
For Middle East and South Africa

Use the AC mains lead that matches the socket for the area you live in.

For Asia

AC mains lead with a label is for Thailand. AC mains lead without a label is for areas other than Thailand.

Other connections (Ô 12)

STEP 1 Connection

			Red White Yellow
			Red White Yellow
	RF coaxial cable
1	2		Audio/video cable
			3
	Aerial cable
			Red White Yellow
	VHF/UHF	RF OUT	AUDIO OUT VIDEO
			R L OUT
	RF IN

VCR’s rear panel

This unit’s rear panel

Connect the unit directly to the	DO NOT
television
Video signals fed through video
cassette recorders will be affected	Television
by copyright protection systems and
the picture will not be shown
correctly on the television.
	VCR
	This unit

•When connecting to a television with a built-in VCR Connect to the input terminals on the television side if there are both television and VCR input terminals.

Connecting to a television with 21-pin Scart terminal

You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit.

Required setting

“AV1 Output” in the Setup menu (Ô 39)

Connecting to a VCR with 21-pin Scart terminal

You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.

Required setting

“AV2 Input” in the Setup menu (Ô 39)

RQT9053

11