BASIC OPERATIONS
BASIC
OPERATIONS
39
Original (Text/Photo)
The Original setting is useful when se nding photographs or illustrations with gray tones. Your machine is
preset to "TEXT". You can select either "TEXT/PHOTO" or "PHOTO" mode.
Verification Stamp (see Note 1) (see Note 2)
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small mark.
You can temporarily change the stamp setting to either "Off" or "On" by using the Select Mode (
).
NOTE
1. When you store document(s) into memory, the Verification Stamp will stamp on the original if it is successfully
stored into memory. In this case the Verificatio n Stam p is not a confi rma tion t hat the docu ment was succ essf ully
transmitted. If you wish to disable the use of the Verification Stamp when storing document(s) into memory,
change the setting of Fax Parameter No. 028. (See page 34)
2. To change the preset Verification Stamp setting, change the Fax Parameter No. 004. (See page 33)

TEXT

TEXT/PHOTO

PHOTO

for text only originals
for text and photo originals
for photo or illustration originals
FUNCTION

SELECT MODE 01 STAMP

Basic Transmission Settings