Transferring incoming calls

Each time an incoming message is recorded in a specifi memory (common, mailbox1, mailbox2, or mailbox3), this feature allows your unit to dial automatically the number to which the message is to be transferred (Message Transfer) or your pager phone number (Pager call) and inform you that the message has been recorded.

—If you choose Message transfer, you can retrieve the message on the same call by the remote operation.

—If you choose Pager call, call your unit from a touch tone telephone to retrieve the message by the remote operation.

For details on the remote operation, see page 49.

This feature is available in the ANS/FAX mode.

When an incoming call is received, the unit will work as follows.

An incoming voice message is recorded in a specifi memory (common, mailbox1, mailbox2, or mailbox3).

After 30 seconds

Your unit dials the transfer phone number or pager number.

Message transfer

The transferred phone rings, then lift the handset.

Your unit will play the pre-recorded greeting message \1

—“This is a telephone answering system. Please enter your remote ID (mailbox 1–3 password) for remote operation.”

Pager call

Your pager beeps.

Call your unit from a touch tone telephone to retrieve the message by the remote operation.

Operations

Advanced

 

 

within 60 seconds

Enter the remote operation ID (see page 50) or mailbox password (see page 44).

 

Retrieve the message by the remote

 

\1 You can record your own greeting

 

 

 

operation.

 

message (see page 54).

 

 

 

 

 

 

 

 

47