Adjusting the feeder pressure

No feeding or multiple feeding occurs frequently, adjust the feeder pressure.

1

Open the front lid by pressing the front lid open

button.

2

Shift the position of the lever by using an

instrument with a pointed end, like a clip or ball-

 

point pen.

 

Position A: Select this when documents do not

 

feed.

 

Position B: Standard position (pre-selected)

 

Position C: Select this when documents multiple

 

feed.

3

Close the front lid by gently pressing down on both

ends.

Lever

A C

B

Front lid open button

Removing the handset cradle

To save space or to use the unit mainly for faxes, you may remove the handset cradle.

1

Set the handset switch to NO HANDSET (see

page 60).

2

Pull the hooks to the right in the order as shown,

while lifting up the handset cradle.

3

Disconnect and connect the power cord again.

Caution:

¡If the handset and handset cradle have been removed when you connect the power cord, an alarm will sound and the following message will be displayed.

CHECK CRADLE

¡Set the handset switch to NO HANDSET (see page 60).

Hooks

2

1

70