Installing the recording paper

1

A Open the back lid by lifting up the tabs located

on both sides.

B Install a recording paper roll in the unit. ¡Make sure that the shiny side of the paper is

facing down and there is no slack, tape, or glue residue on the paper roll.

 

correct

incorrect

2

Insert the leading edge of the recording paper

between the recording paper roller and the silver

plate.

3

Close the back lid by gently pressing down on both

ends.

B

Tab

Connection

andInstallation

 

 

 

A

 

 

Recording paper roller

Silver plate

Note:

¡Only use the included roll of paper or specified recording paper, or else the print quality may be affected and/or excessive thermal head wear may occur.

¡The beginning of some recording paper rolls are secured with glue or tape.

Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation. ¡To order recording paper, see page 75.

Installing the paper stacker

Install the paper stacker.

Paper stacker

9