Installing your unit

Installing the handset cradle

If you want to use this unit with a handset, install the handset and handset cradle.

¡To save space or to use the unit mainly for faxes, you may remove the handset cradle.

Even if the handset and handset cradle are not installed, you can make or answer calls using the SP-PHONE button. When you don’t use the handset and handset cradle, see pages 60 and 70.

1 Connect the handset cord.

2

A Open the front lid by pressing the front lid open

button.

B Open the back lid by lifting up the tabs located on both sides.

3

Insert the handset cradle by matching the

triangles.

4

Press down on the

marked on the handset

cradle until it clicks into place.

¡Make sure the two hooks lock the handset cradle firmly.

5

Place the handset on the handset cradle and close

the lids securely.

¡If the following message is displayed when the unit is turned on, the handset cradle is not installed correctly.

CHECK CRADLE

Check step 4 again.

Handset cord

Handset

 

Tab

 

B

A

Front lid open

 

button

 

Triangles

Hooks

Triangles

8