Operating the answering device from a remote phone

The following operations are available from a remote location with a touch tone telephone.

Set the unit to the ANS/FAX mode in the AUTO RECEIVE mode before going out (see pages 14 and 15).

Dial key

Remote command

Page

Dial key

Remote command

Page

 

 

 

 

 

 

 

Repeats a message

52

 

Erases a specifi message

52

 

 

 

 

 

 

 

Skips a message

52

 

Erases all messages

52

 

 

 

 

 

 

 

New message playback

51

 

Turns on message transfer

53

 

 

 

 

/pager call for incoming

 

 

51

 

 

All message playback

 

messages

 

 

 

 

 

 

 

 

Room monitor

52

 

Turns off message transfer

53

 

 

 

 

/pager call for incoming

 

 

53

 

 

Re-records a greeting message

 

messages

 

 

 

 

 

 

 

 

Stops re-recording of a greeting

53

 

Skips the greeting message

53

 

message

 

 

 

 

 

 

 

 

 

 

Remote operation card

¡You may cut out this remote operation card to use.

Operations

Advanced

 

 

Mailbox Remote Operation

»Recording a message in a mailbox:

1.Call your unit.

2.Press J and the mailbox no. (A, B or C).

3.Leave a message.

»Retrieving messages from a mailbox:

1.Call your unit.

2.Press J and the mailbox no. (A, B or C).

3.Enter the mailbox password

￿￿￿.

4.Press the remote command key (refer to the reverse side).

 

 

 

Notice of Remote Operation

 

 

¡The remote operation is available

 

 

 

only from a touch tone phone when

 

 

 

the unit is in the ANS/FAX mode.

 

 

¡When the unit is in the TEL mode,

 

 

 

call your unit and wait for 15 rings.

 

 

 

The answering system will

 

 

 

temporarily answer the line. Enter the

Fold

 

 

 

remote operation ID during the

here

 

 

greeting message.

 

 

 

 

 

 

The unit will switch to the ANS/FAX

 

 

 

mode.

 

 

¡When you press any key, press

 

 

 

firmly.

 

 

¡To send a document, press JJ.

 

 

 

When a fax tone is heard, start

 

 

 

transmission.

49