Error messages on the display

If the unit detects a problem, the following messages will appear on the display.

DISPLAY MESSAGECAUSE AND REMEDY

 

 

 

 

 

¡There is something wrong with the unit.

CALL SERVICE

 

 

Contact our service personnel (see page 74).

 

 

 

 

 

 

 

 

 

 

CHECK COVER

 

¡The back lid is open. Close it.

 

 

 

 

 

 

 

 

¡The handset and handset cradle have been removed when you connect the

CHECK CRADLE

 

 

power cord.

 

 

 

 

 

 

—When you want to use the handset and handset cradle, install the handset

 

 

cradle correctly (see page 8).

 

 

¡—When you do not use the handset and handset cradle, set the handset switch

 

 

to NO HANDSET (see page 60). Then, disconnect and connect the power

 

 

cord again.

 

 

 

 

 

¡The document is not fed into the unit properly. Reinsert the document. If the

CHECK DOCUMENT

 

 

misfeeding occurs frequently, clean the document feeder rollers inside the unit

 

 

 

 

 

 

(see page 71). If the problem remains, adjust the feeder pressure (see page 70).

 

 

 

 

 

CHECK MEMORY

 

¡Memory (phone numbers, parameters, etc.) has been erased. Re-program.

 

 

 

 

 

 

 

 

¡A mechanical error occurred. Open the back lid and re-install the recording

MECHA ERROR

 

 

paper (see page 9).

 

 

 

 

 

 

 

 

 

¡There is no room left in memory to record a message. Erase some or all of the

MEMORY FULL

 

 

messages (see pages 29 and 46).

 

 

 

 

 

 

 

 

 

NO RESPONSE

 

¡The receiving unit is busy or ran out of recording paper. Try again.

 

 

 

 

 

 

 

 

¡The TEL/FAX greeting message has not been recorded. Record a greeting

NO TEL GREETING

 

 

message (see page 54).

 

 

 

 

 

 

 

 

 

OUT OF PAPER

 

¡The unit ran out of recording paper. Install a new recording paper (see page 9).

 

 

 

 

 

 

 

 

PAPER JAMMED

 

¡A recording paper jam occurred. Clear the jammed paper (see page 68).

 

 

 

 

 

 

 

 

¡The other fax machine does not provide the polling function. Check with the

POLLING ERROR

 

 

other party.

 

 

 

 

 

 

 

 

REDIAL TIME OUT

 

¡The receiving unit is busy or ran out of recording paper. Try again.

 

 

 

 

 

 

 

 

¡The document is jammed. Remove the jammed document (see page 69).

REMOVE DOCUMENT

 

 

¡Attempted to transmit a document longer than 600 mm (235⁄8w). Press the STOP

 

 

 

 

 

 

button and remove the document (see page 69). Divide the document into two or

 

 

more sheets and try again.

 

 

 

 

 

TRANSMIT ERROR

 

¡A transmission error occurred. Try again.

 

 

 

 

 

 

 

 

UNIT OVERHEATED

 

¡The unit is too hot. Let the unit cool down.

 

 

 

 

 

 

Troubleshooting Care Routine and

65