Panasonic KX-FL313HK operating instructions Advanced features

7. Programmable Features

7.3 Advanced features

Feature/Code	Selection
Setting the journal report	{1} “ON” (default): The unit will print a journal report automatically after
to print automatically	every 30 new fax transmissions and receptions (page 28).
{#}{2}{2}	{2} “OFF”: The unit will not print a journal report, but will keep a record of
	the last 30 fax transmissions and receptions.
Sending documents	If you cannot send a fax overseas even if the number is correct and the line
overseas	is connected, activate this feature before sending the fax.
{#}{2}{3}	This feature improves the reliability by reducing the transmission speed.
	{1} “NEXT FAX”: This setting is effective only for the next attempted fax
	transmission. After transmission, the unit will return to the previous setting.
	{2} “OFF”: Deactivates this feature.
	{3} “ERROR” (default): When the previous fax transmission fails and you
	wish to re-send the document.
	Note:
	L This feature is not available for broadcast transmission.
	L Calling charges may be higher than usual.
Sending a fax at a specific	This feature allows you to take advantage of low-cost calling hours offered
time	by your telephone company. This feature can be set up to 24 hours in
{#}{2}{5}	advance of the desired time.
	{1} “ON”
	{2} “OFF” (default)
	To send a document:
	1.	Insert the document.
	2. If necessary, press {A} or {B} repeatedly to select the desired
		resolution (page 27).
	3.	Press {MENU}.
	4.	Press {#}, then {2}{5}.
	5. Press {1} to select “ON”.
	6.	Press {SET}.
	7. Enter the fax number.
		L To enter an item using one-touch dial feature and phonebook, see
		step 4, “4.3 Sending a fax using one-touch dial feature and
		phonebook”, page 29. (When using phonebook, you do not have to
		press {>} before pressing {A} or {B}.)
	8.	Press {SET}.
	9. Enter the transmission start time.
		L If you selected 12-hour time entry (page 17), press {*} repeatedly
		to select AM or PM.
		L If you selected 24-hour time entry (page 17), the time is set using
		24-hour time entry.
	10. Press {SET}.
	L To cancel after programming, press {STOP} then {SET}.
Setting the caller	{1} “ON”: The unit will print the caller information list automatically after
information list to print	every 30 new calls (page 23).
automatically	{2} “OFF” (default): The unit will not print the caller information list, but will
{#}{2}{6}	keep records of the information for the last 30 callers.

42