Panasonic KX-FL313HK When a function does not work, check here, Initial settings, General

	8. Help
8.3 When a function does not work, check here
8.3.1 Initial settings
Problem	Cause & Solution
I cannot hear a dial tone.	L The telephone line cord is connected to the [EXT] jack on the unit. Connect
	to the [LINE] jack (page 15).
	L If you use a splitter/coupler to connect the unit, remove the splitter/coupler
	and connect the unit to the wall jack directly. If the unit operates properly,
	check the splitter/coupler.
	L Disconnect the unit from the telephone line and connect a known working
	telephone. If the working telephone operates properly, contact our service
	personnel to have the unit repaired. If the working telephone does not
	operate properly, contact your telephone company.
	L The power cord or telephone line cord is not connected. Check the
	connections.
	L If you connected the fax machine through a computer modem, connect the
	fax machine directly to a telephone line jack.
I cannot make calls.	L The dialling mode setting may be wrong. Change the setting (feature #13 on
	page 16).
The unit does not ring.	L The ringer volume is turned OFF. Adjust it (page 17).
8.3.2 General
Problem	Cause & Solution
The other party complains	L FAX ONLY mode is set. Tell the other party the number is only used for
they only hear a fax tone and	faxes.
cannot talk.	L Change to TEL mode (page 33) or TEL/FAX mode (page 34).
The {REDIAL/PAUSE} button	L If this button is pressed during dialling, a pause will be inserted. If pressed
does not function properly.	immediately after a dial tone is obtained, the last number dialled will be
	redialled.
The receiving mode does not	L Distinctive Ring is set (feature #31 on page 37).
function properly.
During programming, I	L All or part of the number is the same. Change the number: feature #41
cannot enter the code or ID	(page 43) and #49 (page 44).
number.
The unit beeps.	L The memory reception alert of feature #44 is ON (page 43), and the unit has
	a document in memory. Press {STOP} to stop the beeps, then see the
	displayed message instructions to solve the problem.
The recording paper does not	L High humidity may cause the recording paper to curl. Try turning the paper
stack properly on the paper	over and re-inserting it. If the curl on the paper is heavy, please remove it
stacker.	from the paper stacker. If you still have this problem, contact our service
	personnel.

49