1. Introduction and Installation
7Lift open the front cover (1), holding OPEN (2).
1
2
9Close the front cover (1) by pushing down on both sides, until locked.
1
LIf the lower glass (3) is dirty, clean it with a soft and dry cloth.
3
8Install the drum and toner unit (1) by holding the tabs.
2
1
LDo not touch the transfer roller (2).
LWhile the unit displays “PLEASE WAIT”, do not open the front cover, or disconnect the power cord.
Toner save feature
If you want to reduce toner consumption, set the toner save setting to ON (feature #79 on page 43). The toner cartridge will last approximately 40 % longer. This feature may lower the print quality.
1.6Paper tray and paper tray cover
1Insert the paper tray (1) into the slot (2) on the back of the unit.
1
2
11