Panasonic KX-FL613HK Broadcast transmission, Programming items into the broadcast memory

4. Fax

4.3Sending a fax using one-touch dial feature and navigator directory

Before using this feature, store the desired names and telephone numbers into one-touch dial feature and navigator directory (page 21).

LKeep the front cover page open for button locations.

1Adjust the width of the document guides to fit the actual size of the document.

2Insert the document (up to 20 pages) FACE DOWN until a single beep is heard and the unit grasps the document.

L If the document guides are not adjusted to fit the document, re-adjust them.

3If necessary, press {RESOLUTION} repeatedly to select the desired resolution (page 27).

4Enter the fax number.

Using stations 1–11:

Press the desired station key.

Using stations 12–22:

Press {LOWER}, then press the desired station key.

Using navigator directory:

Press {<} or {>}, then press {A} or {B} repeatedly to display the desired item and press {FAX START}.

Fax auto redial

If the line is busy or if there is no answer, the unit will automatically redial the number up to 5 times.

LTo cancel redialling, press {STOP}, then press {SET}.

If your unit does not send a fax

LConfirm that you have entered the number correctly, and that the number is a fax

number.

LConfirm that the other party’s fax machine is answering by turning ON the connecting tone feature (feature #76, page 42).

4.4Broadcast transmission

By storing one-touch dial and navigator directory items (page 21) into the broadcast memory, you can send the same document to multiple parties (up to 20). Your programmed items will remain in the broadcast memory, allowing frequent re-use.

LThe broadcast function utilises stations 1–3. The one-touch dial function will be disabled.

LKeep the front cover page open for button locations.

4.4.1Programming items into the broadcast memory

1Press {DIRECTORY PROGRAM}.

2Select the desired broadcast key.

For BROADCAST 1-2:

1.Press the desired {BROADCAST} key.

2.Press {A} or {B} repeatedly to select “BROADCAST”.

For MANUAL BROADCAST:

1.Press {MANUAL BROAD}.

2.Press {A} or {B} repeatedly to select “MANUAL BROAD”.

3Press {SET}.

4Program items.

Using stations 1–11:

Press the desired station key.

Using stations 12–22:

Press {LOWER}, then press the desired station key.

Using navigator directory:

Press {A} or {B} repeatedly to display the desired item, and press {SET}.

Using the dial keypad (only for MANUAL BROAD):

Enter the fax number and press {SET}.

L To program other items, repeat this step (up to 20 items).

5Press {SET} after programming all of the desired items.

L To program another broadcast key, repeat steps 2 to 5.

6Press {STOP} to exit.

29