7. Programmable Features
7.3 Advanced features
Code #22: Setting the journal report to print automatically
AUTO JOURNAL
=ON[±]
“ON” (default): The unit will print a journal report automatically after every 30 new fax transmissions and receptions (page 28). “OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax transmissions and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR [±]
If you cannot send a fax overseas even if the number is correct and the line is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
“NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.
“ERROR” (default): When the previous fax transmission fails and you wish to
“OFF”: Deactivates this feature.
Note:
LThis feature is not available for broadcast transmission.
LCalling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [±]
This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.
To send a document:
1.Insert the document.
2.If necessary, press {RESOLUTION} repeatedly to select the desired resolution (page 27).
3.Press {MENU}.
4.Press {#} then {2}{5}.
5.Press {A} or {B} repeatedly to select “ON”.
6.Press {SET}.
7.Enter the fax number.
8.Press {SET}.
9.Enter the transmission start time.
LPress {*} repeatedly to select “AM” or “PM”.
10.Press {SET}.
LTo cancel after programming, press {STOP} then {SET}.
Code #26: Setting the Caller ID list to be printed automatically
AUTO CALL. LIST
=ON[±]
“ON” (default): The unit will print the Caller ID list automatically after every 30 new calls (page 24). “OFF”: The unit will not print the Caller ID list, but will keep records of the information for the last 30 callers.
Code #27: Setting the black list function
BLACK LIST
=OFF [±]
See page 35 for details.
Code #30: Changing the silent fax recognition ring setting
SILENT FAX RING
RINGS=3 [±]
To change the number of times the unit rings while in TEL/FAX mode. You can select “3” (default), “4”, “5”, “6”, “7”, “8” or “9”. See page 33 for details.
Code #31: Activating the Distinctive Ring feature
DISTINCTIVE RING
=OFF [±]
See page 36 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON[±]
To receive a fax document that is longer than your recording paper.
“ON” (default): The unit will fit received documents onto your recording paper. “OFF”: The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL [±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too light.
41
