Panasonic KX-FT901BX manual Basic features

9. Programmable Features

9.2 Basic features

Code #01: Setting the date and time

SET DATE & TIME

See page 14 for details.

Code #02: Setting your logo

YOUR LOGO

See page 15 for details.

Code #03: Setting your fax number

YOUR FAX NO.

See page 17 for details.

Code #04: Printing a sending report

SENDING REPORT

To print a sending report for fax transmission results (page 27).

“ERROR” (default): A sending report will be printed only when fax transmission fails.

“ON”: A sending report will be printed after every transmission.

“OFF”: Sending reports will not be printed.

Code #05 (KX-FT901/KX-FT903 only): Changing the receiving mode in the auto answer setting

AUTO ANSWER

“FAX ONLY” (default): Facsimile only mode (page 36)

“TEL/FAX”: Telephone/Facsimile mode (page 36)

Code #05 (KX-FT907 only): Changing the receiving mode in the auto answer setting

AUTO ANSWER

“TAD/FAX” (default): Telephone Answering Device/Facsimile mode (page 35)

“FAX ONLY”: Facsimile only mode (page 36)

“TEL/FAX”: Telephone/Facsimile mode (page 36)

Code #06 (KX-FT907 only): Changing the ring setting in TAD/FAX mode

TAD RING COUNT

To change the number of rings before the unit answers a call in TAD/FAX mode. You can select “1”, “2” (default), “3”, “4”, “TOLL SAVER” or “RINGER OFF”. See page 35 for details.

Code #07: Changing the ring setting in FAX ONLY mode

FAX RING COUNT

To change the number of rings before the unit answers a call in FAX ONLY mode.

You can select “1”, “2” (default), “3” or “4”.

Code #09: Changing the TEL/FAX delayed ring setting

TEL/FAX RING

If you use an extension telephone in TEL/FAX mode, select the desired number of times the extension telephone rings before the unit answers the call. You can select “1”, “2” (default), “3” or “4”. See page 36 for details.

Code #10 (KX-FT907 only): Changing the maximum incoming message recording time

RECORDING TIME

“VOX” (default): Unlimited within the voice memory capacity (page 60).

“1 MIN”: Up to 1 minute.

Code #11 (KX-FT907 only): Setting the remote operation ID

REMOTE TAD ID

1.Press {MENU}.

2.Press {#}, then {1}{1}.

3.Press {SET}.

4.Enter any 3-digit number except a number using 0 or 7.

L The default ID is “111”.

5.Press {SET}.

6.Press {MENU}.

Code #13: Setting the dialling mode

DIALLING MODE

If you cannot dial, change this setting depending on your telephone line service.

“TONE” (default): For tone dial service.

“PULSE”: For rotary pulse dial service.

47