Panasonic KX-FT901BX manual Code #41 Changing the fax activation code

9. Programmable Features

Code #41: Changing the fax activation code

FAX ACTIVATION

If you wish to use an extension telephone to receive faxes, activate this feature and program the activation code.

1.Press {MENU}.

2.Press {#}, then {4}{1}.

3.Press {SET}.

4.Press {A} or {B} repeatedly to select “ON”.

5.Press {SET}.

6.Enter your code (2–4 digits) using the dial keys 0–9, {*} and {#}.

L The default code is “@#9”. L Do not enter “0000”.

7.Press {SET}.

8.Press {MENU}.

Code #42 (KX-FT907 only): Setting the message alert

MESSAGE ALERT

To alert you when new voice messages are recorded. The unit beeps slowly until you listen to the recorded messages.

“ON”: You will be alerted to new messages by a beeping sound.

“OFF” (default): Deactivates this feature.

Code #43 (KX-FT907 only): Setting the recording time alert

REC. TIME ALERT

To alert you when there is less than 60 seconds of remaining recording time. The slow beeps will continue until you erase the recorded messages (page 42) or print out the documents in memory. “ON”: You will be alerted that you have reached the recording time limit by a beeping sound. “OFF” (default): Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV

To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). “ON” (default): You do not have to press {FAX/START} for fax reception.

“OFF”: You have to press {FAX/START} for fax reception.

Code #47 (KX-FT907 only): Setting the voice guidance

VOICE GUIDANCE

If you wish to hear voice guidance, activate this feature.

“ON” (default): You will hear the friendly reception voice guide, pre-recorded messages and voice time/day stamp.

“OFF”: Deactivates this feature.

Code #49: Setting the auto disconnection

AUTO DISCONNECT

To answer a call with an extension telephone in TEL/FAX mode (page 36), activate this feature and program the code.

1.Press {MENU}.

2.Press {#}, then {4}{9}.

3.Press {SET}.

4.Press {A} or {B} repeatedly to select “ON”.

5.Press {SET}.

6.Enter your code (2–4 digits) using the dial keys 0–9 and {*}.

L The default code is “@0”.

7.Press {SET}.

8.Press {MENU}.

Code #54 (KX-FT907 only): Changing the recording time for your TAD/FAX greeting message

GREETING TIME

“16s” (default): Maximum recording time is 16 seconds.

“60s”: Maximum recording time is 60 seconds. See page 40 for details.

Code #58: Setting the original mode

ORIGINAL

To send or copy a document with faint or dark writing, set this feature before transmission or copying.

“NORMAL” (default): Used for normal writing.

“LIGHT”: Used for faint writing.

“DARKER”: Used for dark writing.

Code #59: Setting the print contrast

PRINT CONTRAST

To adjust the darkness of received or copied documents.

“NORMAL” (default): Normal contrast.

49