Panasonic KX-MB2060, KX-MB2061 10.10 Using the answering machine with the cordless handset (KX-MB2060 optional)

10.9.2 Remote operation using remote
commands
1Call your unit.
2Enter the remote operation ID during or after the
TAM/FAX greeting message.
3Enter a remote command within 10 seconds.
Note:
RWhen you press a key, press firmly.
Key Remote command
M1NRepeat message (during
playback)*1
M2NSkip message (during playback)
M4NPlay new messages
M5NPlay all messages
M6NPlay greeting message
M7NRecord greeting message
M9NStop current operation*2
M0NTurn OFF auto answer setting
MGNM4NErase currently playing message
MGNM5NErase all messages
MGNM6NErase greeting message (during
greeting message playback)*3
MGNMBNEnd remote operation
*1 If pressed within the first 5 seconds of a message,
the previous message is played.
*2 To resume operation, press a command key within
10 seconds.
*3 Unit resets to a pre-recorded greeting message.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
operation.
2. Wait about 10 seconds.
3. Hear the voice guide and/or hear 1 beep.
4. Leave a message.
To turn ON the auto answer setting
1. Call your unit and let it ring 10 rings.
RA beep will sound.
2. Enter the remote operation ID (feature #306 on
page 76, 88) within 10 seconds.
RThe receiving mode will be set to TAM/FAX or
FAX ONLY mode, depending on the setting of
feature #400 (page 81).
3. Hang up the handset.
Note:
RYou cannot turn ON the auto answer setting when the
unit is set to TEL mode during the time periods set
for silent mode (page 50).
10.10 Using the answering
machine with the cordless
handset (KX-MB2060 optional)
The maximum recording time of your greeting message
is either 16 seconds (default) or 60 seconds.
Helpful hints:
RTo activate TAM/FAX mode with the cordless
handset, see page 63.
Important:
ROnly 1 person can access the answering machine
(listen to messages, record a greeting message,
etc.) at a time.
RWhen callers leave messages, the unit records
the day and time of each message. Make sure the
date and time have been set correctly (page 28).
MCNMDNMFNMEN
MCN
MOFFN
A
10.10.1 Recording your greeting message
1MMENUN (soft key A) A M#NM3NM0NM2N
2“Yes” A MSELECTN (soft key A)
3After a beep sounds, hold the cordless handset about
20 cm (8 inches) away and speak clearly into the
microphone (60 seconds max.).
4Press MSTOPN (soft key A) to stop recording.
RThe greeting message will be played.
5MOFFN
To check the greeting message
1. MMENUN (soft key A) A M#NM3NM0NM3N
2. MOFFN
To reset to a pre-recorded greeting message
If you want to use a pre-recorded greeting message once
you record your own greeting message, you need to
erase your own greeting message.
1. MMENUN (soft key A) A M#NM3NM0NM4N
2. MYESN (soft key A) A MOFFN
74
10. Answering Machine