Panasonic KX-TDE100, KX-TDE200 Settings on the Programming Mode, Setting Features, Little Dark

3.1 Customising Your Phone (Personal Programming)

3.1.2Settings on the Programming Mode

You can programme features using the programming mode.

–Setting Features

–Clearing Features

• To exit at any time, lift the handset.

• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.

Setting Features

The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to indicate your customised setting.

Notice

The default value may vary depending on country/area.

To enter the programming mode To programme To exit

PROGRAM

OR

PAUSE

programming

input

OR

AUTO DIAL

STORE

selection & parameter

	PROGRAM
OR	OR
AUTO DIAL	PAUSE
STORE

Press PROGRAM	Follow	Press ENTER	Follow Selection	Press ENTER	Press PROGRAM
or PAUSE.	programming	or STORE.	& Parameter.	or STORE.	or PAUSE.
	input.

Item	Programming			Selection & Parameter
	Input
			PT: The display shows the PBX number, slot number
			and port number. (Some IP-PTs may not display the
			extension number.)
			<example>
				EXT1050:10308
Your extension information	0	0		PBX no.				Port no.
					Slot	no.
			PS: The display shows the PS number.
			<example>
				EXT3001:99001
							PS no.
			1			Light
Preferred display contrast level
			2			Little Light
from the 4 levels available	0	1
(Display Contrast Selection)*1			3			Little Dark
			4			Dark

196 User Manual