Panasonic KX-TDE600 manual Room Status Control, For the KX-TDE100/KX-TDE200 Off Checked-out

1.3.60 Room Status Control

1.3.60 Room Status Control

In a hotel-type environment, an extension assigned as a hotel operator can check guests into or out of rooms and confirm that the room is clean and ready for the next guest by changing the room status of the corresponding extension. The hotel operator’s extension must have flexible buttons assigned as Check-in, Check-out, and Cleaned-up*1buttons, and a DSS button for each extension that will be used in a guest room.

*1 The Cleaned-up feature is only available for the KX-TDE600.

• The hotel operator must be using a 6-line display PT to use the Room Status Control features.

• While in Room Status Control mode:

a.The hotel operator’s extension can only check extensions in/out and ready/not ready. All other operations will be ignored.

b.The light of each DSS button shows the room status of the corresponding extension as follows:

For the KX-TDE100/KX-TDE200 Off: Checked-out

Red on: Checked-in

For the KX-TDE600

Off: Checked-out and Ready

Flashing Red: Checked-out and Not Ready

Red on: Checked-in

[Light Pattern Example: Checked-in Mode]

DSS button

Room1230	Rooms 1230 and 1234
Room1231	are currently in
Room1232	checked-in status.
Room1233
Check-in button
Room1234
Check-out button
Cleaned-up button

c.The lights of other buttons may not show their normal display.

d.The hotel operator’s extension is considered to be busy. Callers to that extension will hear a busy tone.

Document Version 2008-10 Operating Manual

115