How to Operate
Example: To select short beeps for 60 seconds
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
| Follow step | PROG |
|
| 1 |
5 | Within three seconds after pressing Prog pad at step 4, press | PROG |
0 | Number/Memory pad “0” once. | 2 |
| ☛ “PROG” will start to blink and 2nd Stage Heating Indicator “2” (the | |
|
| |
| length of beep tone “short beeps for 60 seconds”) will be indicated. |
|
6 | Press Prog pad. | PROG |
|
| |
| ☛ “PROG” will stop blinking. This means that you have completed | 2 |
| programming. | |
|
| |
| Three seconds later, “0” will appear. |
|
• Close the door. One minute later, Digital Display Window will go blank.
G. PROGRAM LISTPAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 | Open the door and leave it open. |
|
☛ The oven lamp will turn on and “0” will appear.
2 | While pressing Stop/Reset pad, press Start pad. | e.g. |
+ | ☛ All currently programmed information (the program set into each | PROG |
| ||
| Number/Memory pad (A/B sides), Beep Tone, and Program Lock | 1 |
| information) will continuously appear. |
|
|
| PROG |
|
| 1 |
|
| PROG |
|
| 2 |
|
| PROG |
Example: To read times of Number/Memory pad “3” at A side (6666 times used)
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 | Open the door and leave it open. |
|
☛ The oven lamp will turn on and “0” will appear.
2 |
| 3 | While pressing Stop/Reset pad, press Number/Memory pad “3”. | e.g. |
+ |
| |||
| ☛ The times that the pressed Number/Memory pad has been used will |
| ||
|
|
| appear. |
|
|
|
|
|
|
Note:
•When you want to read the times of each pad at B side, press Shift (A/B) pad while the display is still showing the number of cycles in step 2.
English
- 11 -