14 –
ENGLISH

Location and function of each part (continued)

Front

Projector Main Unit

Rear

1 Projection lens cover (p. 34)
2 Projection lens (optional)
Lens for projecting images on the screen.
3 Remote control receiver window (front)
(p. 17)
This window receives the signal beam emitted
from the remote control.
4 LAMP (LAMP1, LAMP2, LAMP3, LAMP4)
monitor (p. 109)
These light when it is time to replace the lamp unit.
It also blinks if something unusual occurs in the
lamp circuit.
5 Temperature monitor (TEMP) (p. 109)
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.
6 Power indicator lamp (p. 35)
The lamp lights in red when the MAIN POWER
switch is turned to “ l ” (on). It turns to green when
the POWER ON button of the remote control or
the main unit is pressed.
7 Air intake vents
Do not cover this vents.
8 Burglar hook
Attach a commercial burglar prevention cable to
this hook port.
9 Adjustable feet (p. 20)
Use these feet to adjust the tilt of the projector.
(Adjustable feet are provided at the front and rear,
right and left.)
j Projection lens cover lock button (p. 34)
This button toggles between lock and unlock
of the detachable cover for the projection lens
(optional).
k Air filter (p. 110)
l Air filter cleaning monitor (pp. 79, 110)
This blinks blue while the air filter is being cleaned.
It lights red when there is a problem with the air
filter.
m Filter cleaning unit fixing screw (p. 110)
This is used to secure the air filter cover.
n Air exhaust vents
Hot air comes out of the air exhaust vents.
o Lamp unit cover screw (p. 113)
p Remote control receiver window (rear) (p. 17)
This also receives the signal beam coming from
the remote control.
q Remote control receiver window (bottom)
(p. 17)
This also receives the signal beam coming from
the remote control.
r Air intake vents
Do not cover this vents.
s Lamp unit cover (p. 113)
The lamp unit is housed.
12 3456
7
n
89j k l m
o
pq rs