Panasonic PT-DW100E operating instructions Frame delay, Press to select Bright Inside Press Enter

10.Press ENTER.

•The “BRIGHT ADJUST” screen will be displayed.

BRIGHT ADJUST

BRIGHT INSIDE

BRIGHT OUTSIDE

11.Press ▲▼ to select “BRIGHT INSIDE”.

12.Press ENTER.

•The “BRIGHT INSIDE” adjustment screen will be displayed.

BRIGHT INSIDE

INTERLOCKED	ON
WHITE	0
RED	0
GREEN	0
BLUE	0

•When “INTERLOCKED” is set to “OFF”, individual adjustment of “RED”, “GREEN” and “BLUE” will be possible.

13.Press ▲▼ to select an item, and press ◄► to adjust the setting.

•Once adjustment is complete, press MENU to return to “BRIGHT ADJUST”.

14.Press ▲▼ to select the part of “UPPER”, “LOWER”, “RIGHT”, “LEFT”.

15.Use ◄► to adjust the width for correcting the “BRIGHT INSIDE” setting (0 to 255).

16.Press ▲▼ to select “BRIGHT OUTSIDE”.

BRIGHT INSIDE

BRIGHT OUTSIDE

OUTSIDE AREA

17.Press ENTER.

•The “BRIGHT OUTSIDE” adjustment screen will be displayed.

BRIGHT OUTSIDE

INTERLOCKED	ON
WHITE	0
RED	0
GREEN	0
BLUE	0

•When “INTERLOCKED” is set to “OFF”, individual adjustment of “RED”, “GREEN” and “BLUE” will be possible.

18. Press ▲▼ to select an item, and press ◄► to adjust the setting.

Projection Edge blending width (right) range

BRIGHT adjustment (right)

Marker

BRIGHT OUTSIDE

BRIGHT INSIDE

Note

•The BRIGHT adjustment is a function for making the brightening of the BRIGHT level in those areas where the pictures overlap less conspicuous when multi-screens have been configured using edge blending. The optimal point is where, after the BRIGHT INSIDE has been adjusted, the compensation amount is the same for the BRIGHT levels in the areas where the pictures overlap and where the pictures do not overlap. If, after the BRIGHT INSIDE adjustment, only the vicinity of the borders of the areas where the pictures overlap and where the pictures do not overlap becomes bright, proceed to adjust the top, bottom, left and right widths. Alternatively, if only the vicinity of the borders has darkened as a result of the width adjustments, proceed with the BRIGHT OUTSIDE adjustment.

•When a rear screen or screen with a high gain is used, the joints may appear to be discontinuous depending on the viewing position.

Frame delay

When 1 080/60i, 1 080/50i and 1 080/24sF signals are being input, this simplifies image processing so that the frame delay for pictures can be shortened.

1. Press ▲▼ to select “FRAME DELAY”.

EDGE BLENDING	OFF
FRAME DELAY	DEFAULT
RASTER POSITION

Basic Operation

ENGLISH – 65