Panasonic PT-DW100E operating instructions Registering the picture mode Settings as presettings

Adjusting the picture (continued)

„ AUTO IRIS (Automatic aperture
				Setting the system selector
adjustment)
			This enables the projector to automatically recognize
	OFF (No automatic	1 (Low)	input signals. Furthermore, if unstable signals are
	adjustment)
			input, the system format can be selected manually.
			1. Press ▲▼ to select “SYSTEM
	3 (High)	2 (Intermediate)
„ MANUAL IRIS (Fixed aperture						SELECTOR”.
						NOISE REDUCTION	OFF
adjustment)						DYNAMIC IRIS	OFF
						SYSTEM SELECTOR	AUTO1
	OFF (No fixed iris)	1 (Low)	2.			Press ENTER.
					• The “SYSTEM SELECTOR” screen will be
	63 (High)	2…62 (Intermediate)
						displayed.

„DYNAMIC GAMMA (signal compensation amount adjustment)

OFF (No automatic
	1 (Low)
correction)
3 (High)	2 (Intermediate)

Note

•The contrast is set to the maximum level when “DYNAMIC IRIS” is set to “3”.

Registering the picture mode

settings as presettings

The picture settings that have been made in the PICTURE MODE screen can be registered.

•Select “PICTURE MODE” in the “PICTURE” screen to carry out this operation.

SYSTEM SELECTOR

CAUTO1

AUTO2

3.Press ▲▼ to switch “SYSTEM SELECTOR”, and then press

ENTER.

•The system formats that can be selected differ depending on the input signals.

„S-video / Video terminal input

signal

Select from AUTO1, AUTO2, NTSC, NTSC4.43, PAL, PALM, PAL-N, SECAM, and PAL60.

Note

•Press the DEFAULT button to return to “AUTO1”.

•“AUTO1” automatically selects from NTSC, PAL, SECAM, NTSC4.43, and PAL60. “AUTO2” automatically selects from NTSC, PAL-M, and PAL-N.

1.Press ENTER.

• A confirmation screen will appear.

SAVE AS DEFAULT SETTING

FOR DYNAMIC?

OKCANCEL

CHANGE

ENTER EXECUTE

2.Press ◄► to select “OK”.

3.Press ENTER.

Note

•If the registered picture mode is selected after registering the picture mode settings as presettings, the new signals will be displayed with the registered adjustments.

„RGB1 / RGB2 / DVI-D terminal

input signal

Select from RGB and YPBPR.

Note

•Refer to the types of signals compatible with the projector. (pp. 120-121)

„Input module

ET-MD77SD1:

Select from AUTO, 480i and 576i.

ET-MD77SD3:

Select from AUTO, 1 080/60i, 1 035/60i, 720/60p, 1 080/24p, 1 080/50i, 1 080/30p, 1 080/25p,

1 080/24sF, 720/50p, and 480i, 576i.

56 – ENGLISH