Status
Displays the status of the projector.
1. Press ▲▼ to select “STATUS”.
| REMOTE2 MODE | DEFAULT |
|
|
| STATUS |
|
|
|
| AIR FILTER CLEANING |
|
|
|
2.Press ENTER.
• The “STATUS” screen will be displayed.
| STATUS |
| 1/3 |
| |
| INPUT | RGB2 |
|
| |
| NAME |
|
| ||
| SIGNAL FREQUENCY | 48.36kHz/59.99Hz |
|
| |
| PROJECTOR RUNTIME | 76h |
|
| |
| LAMP1 | 341h | / ON / |
|
|
| LAMP2 | 334h | / ON / |
|
|
| LAMP3 | 342h | / ON / |
|
|
| LAMP4 | 97h / ON / |
|
| |
| INTAKE AIR TEMP. | 31°C/87°F |
|
| |
| OPTICS MODULE TEMP. | 27°C/80°F |
|
| |
| AROUND LAMP TEMP. | 31°C/87°F |
|
| |
| REMOTE2 STATUS | DISABLE |
|
| |
|
|
|
|
|
|
3. Press ◄► to move to the next page.
| STATUS | 2/3 |
| |
|
|
|
|
|
| PROJECTOR MODEL | DW100 |
|
|
| SERIAL NUMBER | SWXXXXX |
|
|
| MAIN VERSION | 1.00 |
|
|
| SUB VERSION | 1.00 |
|
|
| NETWORK VERSION | 1.00 |
|
|
|
|
|
|
|
4. Press ◄► to move to the next page.
| STATUS |
| 3/3 | |
| ON COUNT |
|
|
|
| POWER ON TIMES |
| 8 |
|
| LAMP1 ON |
| 362 |
|
| LAMP2 ON |
| 363 |
|
| LAMP3 ON |
| 366 |
|
| LAMP4 ON |
| 116 |
|
| SHUTTER | 6( | 0) |
|
| AIR FILTER CLEANING | 1( | 0) |
|
| AUX | MD77SD1:SN |
| |
| NUMBER OF ENTRY SIGNAL | 0/96 |
| |
| AC VOLTAGE | NORMAL |
| |
|
|
|
|
|
•INPUT:
Displays the input selection state.
•NAME:
Displays the input signal name.
•SIGNAL FREQUENCY:
Displays the frequency of the input signal.
•PROJECTOR RUNTIME: Displays the projector runtime.
•LAMP1:
Displays the lighting time of LAMP1.
•LAMP2:
Displays the lighting time of LAMP2.
•LAMP3:
Displays the lighting time of LAMP3.
•LAMP4:
Displays the lighting time of LAMP4.
•INTAKE AIR TEMP:
Displays the intake air temperature of the projector.
•OPTICS MODULE TEMP.:
Displays the temperature inside the projector.
•AROUND LAMP TEMP.:
Displays the temperature around the lamp of the projector.
•REMOTE2 STATUS:
Displays the control status of REMOTE2.
•PROJECTOR MODEL: Displays the type of projector.
•SERIAL NUMBER:
Displays the serial number of the projector.
•MAIN VERSION:
Displays the main version of the firmware of the projector unit.
•SUB VERSION:
Displays the sub version of the firmware of the projector unit.
•NETWORK VERSION:
Displays the network version of the projector unit.
•ON COUNT:
POWER ON TIMES: |
| ||
Displays the number of times the power has |
| ||
been turned on. |
| ||
LAMP1 ON: |
| ||
Displays the number of times LAMP1 has been lit. |
| ||
LAMP2 ON: | Features | ||
SHUTTER: | |||
Displays the number of times LAMP2 has been lit. |
| ||
LAMP3 ON: |
| ||
Displays the number of times LAMP3 has been lit. |
| ||
LAMP4 ON: |
| ||
Displays the number of times LAMP4 has been lit. |
| ||
Displays the number of times the shutter function | Special | ||
has been used. | |||
| |||
AIR FILTER CLEANING: |
| ||
Displays the number of times the air filter has |
| ||
been cleaned. |
| ||
• AUX: |
| ||
Displays the name of the optional input module |
| ||
inserted in the input module. |
| ||
| |||
• NUMBER OF ENTRY SIGNAL: |
| ||
Displays the number of registered signals. |
| ||
• AC VOLTAGE: |
| ||
Displays the AC voltage state. |
| ||
|
| ||
Cleaning the air filter |
|
| |
This can be used to set air filter cleaning. |
| ||
1. Press ▲▼ to select “AIR FILTER CLEANING”.
| STATUS |
|
|
|
|
| AIR FILTER CLEANING |
|
|
|
|
| AUTO POWER OFF | DISABLE |
|
|
|
|
|
|
|
|
|
|
| ENGLISH – 79 | |||
