With other | 3 | Printing pictures from |
products | PictBridge printers | |
|
|
Connect the unit and AC adaptor (P.20), and set the mode dial to a setting other than [OFF].
Connect the unit to the printer using the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PictBridge].
Select the still pictures to print.
Set the number of copies.
• To not print the picture, set “0”.
• Repeat steps 
and 
to select up to 8 still pictures for printing.
Number of copies (Max. 9)
●Do not use any other USB connecting cables except the supplied one. (Operation is not guaranteed with any other USB cables.)
●Connect the unit directly to the printer without going through a USB hub. ●For paper size and print quality, etc., check printer settings.
●Avoid the following operations during printing. Otherwise, pictures will not print correctly:
•Disconnecting the USB cable
•Opening the card/battery door
•Rotating the mode dial
•Shutting off power
