Before Using
This unit has the following functions concerning information security. Please use them properly.
■Operation Password function
It is possible to set a password in order to prevent a third party from operating the electronic board when the power turns on or after a certain period of time has passed.
For information on setting the password, refer to page 27.
The following display appears in the password input
display. Press the Mode Key (
), the
( ) or the Advance Key ( ) and enter the
■Screen Erase Announce function
After scanning the screen, the following display appears to prompt you to erase the text/diagrams on the screen.
When this display appears, erase the written text/ diagrams in order to prevent a third party from seeing the screen before the written text/diagrams are erased. Press the Mode Key (
) to cancel this display.
Note
•If this unit is not operated for about 5 minutes, the screen saver function is activated to prevent burn in, and the following display appears:
Note
•Do not forget the Password.
If you forget the Password, call your dealer.
Press any key to cancel this display.
16
