Panasonic UB-5838C, UB-5338C Storing images on a USB flash memory device, Scanning

Scanning

Storing images on a USB flash memory device

1	Set the power switch to on ( I ).
2	Connect the USB flash memory device to “USB
	Connector-A for USB Flash Memory Device”.

•When the USB flash memory device is connected, a USB flash memory icon will blink on the display. Once the unit recognizes the device, the icon will stop blinking.

The display below is an example of the unit in standby mode.

Note

•You cannot use a USB flash memory device that is equipped with certain features such as a security feature.

3	Press the Mode Key	to select the
	scanning mode.
4	Press the Start/Stop Key.
	• The unit starts scanning.

• The scanning status is shown on the display.

•When scanning has finished, a preview of the scanned image is shown on the display.

Note

•Do not remove the USB flash memory device until the preview is shown on the display.

5	Press the Advance Key ( ) to zoom in on the
	image.

	• It is possible to view specific areas of the
	image.
	• The current view area is shown on the top left
	side of the display.
	Press the Set-up Key (	) to move down.
	Press the Advance Key (	) to move left.
	• Press the Mode Key (	) to return to the
	preview.
6	Press the Mode Key ( ).
	• The Screen Erase Announce is shown on the
	display.
7	After erasing the written text/diagrams on the
	screen, press the Mode Key ( ) to return to

standby mode.

• Only remove the USB flash memory device once you have returned to standby mode.

• For information on saving files on a USB flash memory device, refer to page 17.

18