Panasonic UB-5338C Electronic Board Operations Check, Before Operation Check, Setting the time

Electronic Board Operations Check

■Before Operation Check

1Wipe the screen film surface.

•Soak a soft cloth with water, wring well, and wipe the screen film surface.

Note

•Do not wipe the screen film surface with paint thinner, benzene, or cleaners that contain abrasives. Doing so may cause discoloration.

•Do not wipe the screen film surface with a dry cloth. Doing so may create static electricity.

2	Attach the power cord.
	• Securely fit the supplied power cord in the AC

inlet of the control box.

■Setting the time

Set the time as follows.

1	Turn the power switch on.
	• The time set-up screen is displayed
	automatically when the power switch is turned
	on for the first time.
	If the time set-up screen is not displayed even
	when the power switch is turned on, press the
	Set-up Key	to enter the setting mode,
	then press the Set-up Key ( ) repeatedly to

select the time set-up mode, and then press the Advance Key ().

2	Set the current time.
	The value can be changed by pressing the Set-
	up Key ( ), and select the setting by pressing
	the Advance Key ( ).
3	Press the Mode Key ( ) to set the time.

Power cord

3 Remove the battery protection sheet.

Battery protection sheet

Installation

45