Scanning
6
7
Press the Start/Stop Key.
•The unit starts scanning and the image is printed.
•The copying status is shown on the display.
•After printing is finished, the Screen Erase Announce will be shown on the display.
After erasing the written text/diagrams on the screen, press the Mode Key (
) to return to standby mode.
Note
•Only remove the USB cable once you have returned to standby mode.
•For information regarding how to set ink cartridges or paper in your printer, please refer to the manual of the printer.
Scanning to a computer
■System Requirements
Computer | IBM→ PC/AT→ or compatible machine |
|
|
Interface | USB 2.0 or USB 1.1*1 |
OS | Windows→ 2000*2 |
| (Service Pack 4 or later) |
| Windows→ XP*3 |
| (Service Pack 2 or later) |
| Windows Vista→*4 |
*1 This unit does not function with
(This unit will not run at the rated speed of
*2 Microsoft→ Windows→ 2000 operating system (hereafter Windows 2000)
*3 Microsoft→ Windows→ XP operating system (hereafter Windows XP)
*4 Microsoft→ Windows Vista→ operating system (hereafter Windows Vista)
■Scanning to a computer
1 | Set the power switch to on ( I ). |
2 | Connect the computer to “USB |
Computer” with a USB cable (included). |
Computer
•The computer icon is shown on the display. The display below is an example of the unit in standby mode.
Using
•The computer recognizes the electronic board as a Removable Disk and the drive is displayed in the Windows Explorer window.
21
