Panasonic UB-5838C, UB-5338C operating instructions Scanning

Scanning

Note

•The use of a USB hub is not recommended. We cannot guarantee that the unit will work properly.

•Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.

3	Press the Mode Key	to select the
	scanning mode.
4	Press the Start/Stop Key.
	• The unit starts scanning.

• The scanning status is shown on the display.

•When scanning has finished, a preview of the scanned image is shown on the display.

Note

•Do not remove the USB cable until the scanned image file has been completed copied to the computer.

5	Open the Removable Disk displayed on the
	computer screen, and click [Refresh] from the
	[View] in the Windows Explorer window.
	• The scanned image file is shown on the
	display.
6	Copy the image file in the Removable Disk onto
	the computer’s desktop or into a folder.

Note

•It is possible to save a maximum of 2 scanned images to the electronic board’s removable disk.

If a third image file is scanned with the electronic board, the first image file will be deleted.

•The scanned image files will be deleted if the USB cable is removed.

7	Press the Advance Key ( ) to zoom in on the
	image with the electronic board.

	• It is possible to view specific areas of the
	image.
	• The current view area is shown on the top left
	side of the display.
	Press the Set-up Key (	) to move down.
	Press the Advance Key (	) to move left.
	• Press the Mode Key (	) to return to the
	preview.
8	Press the Mode Key ( ).
	• The Screen Erase Announce is shown on the
	display.
9	After erasing the written text/diagrams on the
	screen, press the Mode Key ( ) to return to

standby mode.

• Only remove the USB cable once you have returned to standby mode.

Perform the following steps when removing the USB cable:

1) Right-click the [Safely Remove Hardware] icon in the taskbar notification area in the bottom-right corner of the display.

(In Windows 2000, the icon is entitled [Unplug or Eject Hardware].)

2) When the list of devices is displayed, click the device to remove, and then click the [Stop] button.

3) Remove the USB cable connected to the computer from the electronic board.

• For information on saving files on a computer, refer to page 17.

22