Moving the Electronic Board
1 | Make sure that the power switch is set to off |
( ), and disconnect the power cord on both | |
| ends. |
| • Make sure if there are any other devices |
| connected to the unit. If so, disconnect them. |
2 | Release the lock A and fold back the fall- |
prevention extension legs B as follows: |
A |
|
A | B |
|
Using
3 Release the caster locks and move the unit.
Releasing the lock
| Note |
| • Always move the unit with 2 people. |
4 | Lock the casters and set the |
extension legs. |
Locking the casters (Push this side)
Push to lock 
5
23
