Panasonic UB-5338C, UB-5838C operating instructions Scanning

Scanning

It is possible to output scanned images to a USB flash memory device, SD memory card, external printer, or computer.

If multiple output devices are connected to this unit at the same time, the output destination will be selected in the following priority:

1.Computer

2.USB flash memory device

3.SD memory card

4.External printer

The current destination is shown on the display.

Note

•Do not install the unit in places subject to direct sunlight or strong lighting. Scanned images may appear blank or darkened.

•When there is no appropriate output destination connected to the unit, an electronic board icon is shown on the display. In this case, the unit will not start scanning even if you press the Start/Stop Key.

•When the output destination is a USB flash memory device, an SD memory card, or a computer, the following file formats can be selected (refer to “File format set-up” on page 25).

Color:	PDF/JPEG format
B/W:	PDF/JPEG format

•Images output to a USB flash memory device or an SD memory card are saved in following folder: [Folder]

For UB-5838C: “UB-5838C”

For UB-5338C: “UB-5338C”

•Images output to a USB flash memory device, an SD memory card, or a computer are saved as following name:

[File name]

MMDDHHxx.pdf (in the case of PDF file)

Sequential number (00-99)

Hour

Day

Month

[File Extension]

PDF file: “MMDDHHxx.pdf”

JPEG file: “MMDDHHxx.jpg”

•For information regarding available USB flash memory devices, SD memory cards, and printers, refer to the following site:

http://panasonic.co.jp/pcc/products/en/eboard/ ub-5838c_info.htm

•When the power switch is set to on ( I ) while the screen is not set to the home position, the screen will move to home position and stop.

•To scan the reverse side of the screen, press the

Advance Key to send the screen film, before proceeding to scan.

Using

17