Panasonic UB-5338C, UB-5838C operating instructions Storing images on an SD, Memory card

				Scanning
Storing images on an SD		3	Press the Mode Key	to select the
			scanning mode.
memory card		4	Press the Start/Stop Key.
1	Set the power switch to on ( I ).		• The unit starts scanning.
			• The scanning status is shown on the display.
2	Open the SD memory card cover and insert the
	SD memory card into the SD memory card slot
	until it is locked. Then close the SD memory
	card cover.
			• When scanning has finished, a preview of the
			scanned image is shown on the display.

Using

• The SD memory card icon is shown on the

display.
The display below is an example of the unit in	Note
standby mode.
	• Do not remove the SD memory card until the
	preview is shown on the display.
5	Press the Advance Key ( ) to zoom in on the
	image.

Note
• SDHC memory card is not supported.
• If an SD memory card has been formatted
(ex. by the general formatting software of a
computer), it oftentimes cannot be recognized	• It is possible to view specific areas of the
by this unit.
	image.
To use the SD memory card with this unit, it
	• The current view area is shown on the top left
must be reformatted to comply with SD
	side of the display.
memory card specifications using the
	Press the Set-up Key (	) to move down.
appropriate formatting software.
	Press the Advance Key (	) to move left.
You can also download the formatting
	• Press the Mode Key (	) to return to the
software for the SD memory card from the

following site:	preview.
http://panasonic.jp/support/global/cs/sd/
download/sd_formatter.html

19