MONITORS AND DISPLAYS
■Spot and Multiscreen Monitor
The
The monitor displays the video signal according to the con- nection made, as shown below.
Spot Monitor: The monitor that is connected to the SPOT OUT connector on the rear of the Recorder. It only displays the video input in single spot or sin- gle sequence.
Displaying the Disk Recorder’s playback is dis- abled.
Multiscreen Monitor: The monitor that is connected to the MULTISCREEN OUT connector on the rear of the Recorder.
It can display the video input in multiscreen mode (4, 7, 9, 10, 13,16 screen segments).
It also displays the Recorder’s playback images. Pressing the SETUP/ESC button for two seconds or more will automatically select this monitor and dis- play the Disk Recorder’s Setup menu.
Note: When a Disk Recorder equipped with the optional
Pressing one of the numeric buttons (1 -
16)will display the selected camera images in a single spot. This function is not available when CAMERA GENLOCK ON is selected on the COMMON SETUP menu.
Disk Recorder
SPOT
OUT
OUT
MULUTISCREEN
Spot Monitor | Multiscreen Monitor |
■Status Display
The status display shows the system status of the Disk Recorder.
It is displayed on the screen of the Multiscreen Monitor dur- ing recording and playback and contains the following information.
The status display is only available on the screen of the Multiscreen Monitor.
Pressing the DISPLAY button toggles all displays on the monitor on and off.
(The Spot Monitor only displays the Group Title and Camera Title.)
q |
|
|
|
|
|
|
|
|
|
|
|
| y |
|
|
|
|
|
|
|
|
|
|
|
| ||
w |
|
|
|
|
|
|
|
|
|
|
|
| u |
|
|
|
|
|
|
|
|
|
|
| |||
e |
|
|
|
|
| !0 | |||||||
r |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
t |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
i o
qTime Display
Displays the hours
wDate Display
eRecording Status and Recording Number Display Displays the recording status and recording number currently being played back.
The recording number is automatically assigned when recording.
REC ✽✽%: Indicates that images are being recorded. (✽✽ indicates the remaining space of the Hard Disk when the HDD DISKEND is set to STOP in the setup menu.)
EMERGENCY: Indicates that an Emergency Recording is being made.
✽✽✽✽✽✽✽✽✽: Recording Number (during playback)
35
